LINK-KUI.LMK

Ports

	eth1 POE IN	wlan1
Port	HEX1.LMK	LINK-LMK.KUI
VLAN	601 - Private 600 - Public	601 - Private 600 - Public
Power	Power In HEX1.LMK

Configuration

/interface bridge
add name=BRIDGE-HAMWAN-PRIVATE
add name=BRIDGE-HAMWAN-PUBLIC
/interface wireless
set [ find default-name=wlan1 ] band=5ghz-a/n channel-width=10mhz disa
    frequency=5825 mode=bridge ssid=HamWAN-PTP wireless-protocol=nv2
/interface vlan
add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601
add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600
add interface=wlan1 name=WLAN1-HAMWAN-PRIVATE vlan-id=601
add interface=wlan1 name=WLAN1-HAMWAN-PUBLIC vlan-id=600
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE
add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC
add bridge=BRIDGE-HAMWAN-PRIVATE interface=WLAN1-HAMWAN-PRIVATE
/ip address
add address=10.246.1.5/16 interface=BRIDGE-HAMWAN-PRIVATE network=10.2
/system leds
set 1 interface=wlan1
/system routerboard settings
set protected-routerboot=disabled