LINK-LMK.KUI

From OCARC
Jump to navigation Jump to search
Sites

Edit This

<img src="http://portal.hamwan.ca/status/icon/site.svg?siteID=1" style="width: 48px">
LMK
<img src="http://portal.hamwan.ca/status/icon/site.svg?siteID=2" style="width: 48px">
BKM
<img src="http://portal.hamwan.ca/status/icon/site.svg?siteID=3" style="width: 48px">
KUI
<img src="http://portal.hamwan.ca/status/icon/site.svg?siteID=4" style="width: 48px">
BGM
<img src="http://portal.hamwan.ca/status/icon/site.svg?siteID=5" style="width: 48px">
TUR
<img src="http://portal.hamwan.ca/status/icon/site.svg?siteID=12" style="width: 48px">
OKM
<img src="http://portal.hamwan.ca/status/icon/site.svg?siteID=6" style="width: 48px">
ROK
<img src="http://portal.hamwan.ca/status/icon/site.svg?siteID=0" style="width: 48px">
CED
<img src="http://portal.hamwan.ca/status/icon/site.svg?siteID=0" style="width: 48px">
ELI

Ports

eth1
POE IN
wlan1
Port HEX1.KUI LINK-KUI.LMK
VLAN 601 - Private
600 - Public
601 - Private
600 - Public
Power Power In
HEX1.KUI

Configuration

/interface bridge
add name=BRIDGE-HAMWAN-PRIVATE
add name=BRIDGE-HAMWAN-PUBLIC
/interface wireless
set [ find default-name=wlan1 ] band=5ghz-a/n channel-width=10mhz disabled=no \
    frequency=5825 mode=station-bridge ssid=HamWAN-PTP wireless-protocol=nv2
/interface vlan
add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601
add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600
add interface=wlan1 name=WLAN1-HAMWAN-PRIVATE vlan-id=601
add interface=wlan1 name=WLAN1-HAMWAN-PUBLIC vlan-id=600
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE
add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC
add bridge=BRIDGE-HAMWAN-PRIVATE interface=WLAN1-HAMWAN-PRIVATE
add bridge=BRIDGE-HAMWAN-PUBLIC interface=WLAN1-HAMWAN-PUBLIC
/ip address
add address=10.246.3.5/16 interface=BRIDGE-HAMWAN-PRIVATE network=10.246.0.0
/system identity
set name=LINK-LMK.KUI
/system leds
set 1 interface=wlan1
/system routerboard settings
set protected-routerboot=disabled