VA7STV/QTH HamWAN Configuration: Difference between revisions
(Created page with "<pre> # oct/10/2017 22:14:17 by RouterOS 6.40 # software id = LEN1-Q3C5 # # model = RouterBOARD LHG 5nD # serial number = 74D806D6673C /interface wireless set [ find default-n...") |
No edit summary |
||
| Line 1: | Line 1: | ||
# oct/19/2017 16:37:59 by RouterOS 6.40 | |||
# oct/ | |||
# software id = LEN1-Q3C5 | # software id = LEN1-Q3C5 | ||
# | # | ||
| Line 6: | Line 5: | ||
# serial number = 74D806D6673C | # serial number = 74D806D6673C | ||
/interface wireless | /interface wireless | ||
set [ find default-name=wlan1 ] band=5ghz-a/ | set [ find default-name=wlan1 ] band=5ghz-onlyn basic-rates-a/g=\ | ||
6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps channel-width=10mhz disabled=no frequency=5920 \ | |||
frequency-mode=superchannel ht-basic-mcs="mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10\ | |||
,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15,mcs-16,mcs-17,mcs-18,mcs-19,mcs-20,mcs-21,mcs-22,mcs-23" radio-name=\ | |||
VA7STV scan-list=HamWAN ssid=HamWan wireless-protocol=nv2 | |||
/interface vlan | /interface vlan | ||
add interface=ether1 name= | add interface=ether1 name=vlan1 vlan-id=1 | ||
/interface wireless channels | /interface wireless channels | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5 | add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\ | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-5 width=5 | Sector1-5 width=5 | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-5 width=5 | add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \ | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-10 width=10 | name=Sector2-5 width=5 | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10 | add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \ | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10 | name=Sector3-5 width=5 | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\ | |||
Sector1-10 width=10 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \ | |||
name=Sector2-10 width=10 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \ | |||
name=Sector3-10 width=10 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\ | |||
Sector1-5 width=5 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \ | |||
name=Sector2-5 width=5 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \ | |||
name=Sector3-5 width=5 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\ | |||
Sector1-10 width=10 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \ | |||
name=Sector2-10 width=10 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \ | |||
name=Sector3-10 width=10 | |||
add band=5ghz-onlyn frequency=5890 list=LinkChannels name=LINK-5890-10 width=10 | add band=5ghz-onlyn frequency=5890 list=LinkChannels name=LINK-5890-10 width=10 | ||
add band=5ghz-onlyn frequency=5910 list=LinkChannels name=LINK-5910-10 width=10 | add band=5ghz-onlyn frequency=5910 list=LinkChannels name=LINK-5910-10 width=10 | ||
add band=5ghz-onlyn frequency=5890 list=LinkChannels name=LINK-5890-5 width=5 | add band=5ghz-onlyn frequency=5890 list=LinkChannels name=LINK-5890-5 width=5 | ||
add band=5ghz-onlyn frequency=5910 list=LinkChannels name=LINK-5910-5 width=5 | add band=5ghz-onlyn frequency=5910 list=LinkChannels name=LINK-5910-5 width=5 | ||
add band=5ghz-onlyn frequency=6050 list=LinkChannels name=LINK-6050 width=10 | |||
/interface wireless security-profiles | /interface wireless security-profiles | ||
set [ find default=yes ] supplicant-identity=MikroTik | set [ find default=yes ] supplicant-identity=MikroTik | ||
| Line 27: | Line 48: | ||
/ip pool | /ip pool | ||
add name=dhcp ranges=192.168.88.10-192.168.88.254 | add name=dhcp ranges=192.168.88.10-192.168.88.254 | ||
/queue simple | |||
add burst-threshold=2M/5M disabled=yes dst=ether1 limit-at=256k/256k max-limit=256k/256k name=queue1 \ | |||
packet-marks=no-mark target="" | |||
add max-limit=5M/25M name="Full Speed" target="" | |||
/snmp community | /snmp community | ||
set [ find default=yes ] name=hamwan | set [ find default=yes ] name=hamwan | ||
| Line 32: | Line 57: | ||
set receive-all=yes ssid-all=yes | set receive-all=yes ssid-all=yes | ||
/interface wireless connect-list | /interface wireless connect-list | ||
add interface=wlan1 mac-address=4C:5E:0C:1F:51:A0 security-profile=default | add disabled=yes interface=wlan1 mac-address=6C:3B:6B:16:70:DA security-profile=default | ||
add disabled=yes interface=wlan1 mac-address=4C:5E:0C:1F:51:A0 security-profile=default | |||
/ip dhcp-client | /ip dhcp-client | ||
add default-route-distance=10 dhcp-options=hostname,clientid disabled=no interface=ether1 | add default-route-distance=10 dhcp-options=hostname,clientid disabled=no interface=ether1 | ||
add default-route-distance= | add default-route-distance=5 disabled=no interface=wlan1 | ||
/ip dhcp-server network | /ip dhcp-server network | ||
add address=192.168.88.0/24 comment=defconf dns-server=8.8.8.8 gateway=192.168.88.1 | add address=192.168.88.0/24 comment=defconf dns-server=8.8.8.8 gateway=192.168.88.1 | ||
| Line 44: | Line 70: | ||
/ip firewall filter | /ip firewall filter | ||
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp | add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp | ||
add action=accept chain=input comment="defconf: accept established,related" connection-state=established,related | add action=accept chain=input comment="defconf: accept established,related" connection-state=\ | ||
established,related | |||
add action=drop chain=input comment="defconf: drop all from WAN" disabled=yes in-interface=wlan1 | add action=drop chain=input comment="defconf: drop all from WAN" disabled=yes in-interface=wlan1 | ||
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related | add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related \ | ||
add action=accept chain=forward comment="defconf: accept established,related" connection-state=established,related | disabled=yes | ||
add action=accept chain=forward comment="defconf: accept established,related" connection-state=\ | |||
established,related | |||
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid | add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid | ||
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new in-interface=wlan1 | add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \ | ||
connection-state=new in-interface=wlan1 | |||
add action=accept chain=input in-interface=wlan1 src-address=24.71.118.152 | add action=accept chain=input in-interface=wlan1 src-address=24.71.118.152 | ||
add action=accept chain=input in-interface=wlan1 src-address=44.135.216.0/23 | add action=accept chain=input in-interface=wlan1 src-address=44.135.216.0/23 | ||
| Line 55: | Line 85: | ||
/ip firewall nat | /ip firewall nat | ||
add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=wlan1 | add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=wlan1 | ||
/ip | /ip service | ||
set ftp address=44.0.0.0/8 | |||
/snmp | |||
set enabled=yes location="49.895100, -119.392502" trap-version=2 | |||
/system clock | /system clock | ||
set time-zone-name=America/Vancouver | set time-zone-name=America/Vancouver | ||
| Line 63: | Line 95: | ||
/system leds | /system leds | ||
set 0 interface=wlan1 | set 0 interface=wlan1 | ||
/tool bandwidth-server | |||
set authenticate=no | |||
/tool graphing interface | /tool graphing interface | ||
add | add | ||
| Line 68: | Line 102: | ||
add | add | ||
/tool mac-server | /tool mac-server | ||
add interface=ether1 | add interface=ether1 | ||
/tool mac-server mac-winbox | /tool mac-server mac-winbox | ||
add interface=ether1 | add interface=ether1 | ||
Revision as of 23:38, 19 October 2017
- oct/19/2017 16:37:59 by RouterOS 6.40
- software id = LEN1-Q3C5
- model = RouterBOARD LHG 5nD
- serial number = 74D806D6673C
/interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyn basic-rates-a/g=\
6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps channel-width=10mhz disabled=no frequency=5920 \ frequency-mode=superchannel ht-basic-mcs="mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10\ ,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15,mcs-16,mcs-17,mcs-18,mcs-19,mcs-20,mcs-21,mcs-22,mcs-23" radio-name=\ VA7STV scan-list=HamWAN ssid=HamWan wireless-protocol=nv2
/interface vlan add interface=ether1 name=vlan1 vlan-id=1 /interface wireless channels add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \
name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \
name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \
name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \
name=Sector3-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \
name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \
name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \
name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \
name=Sector3-10 width=10
add band=5ghz-onlyn frequency=5890 list=LinkChannels name=LINK-5890-10 width=10 add band=5ghz-onlyn frequency=5910 list=LinkChannels name=LINK-5910-10 width=10 add band=5ghz-onlyn frequency=5890 list=LinkChannels name=LINK-5890-5 width=5 add band=5ghz-onlyn frequency=5910 list=LinkChannels name=LINK-5910-5 width=5 add band=5ghz-onlyn frequency=6050 list=LinkChannels name=LINK-6050 width=10 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip hotspot profile set [ find default=yes ] html-directory=flash/hotspot /ip pool add name=dhcp ranges=192.168.88.10-192.168.88.254 /queue simple add burst-threshold=2M/5M disabled=yes dst=ether1 limit-at=256k/256k max-limit=256k/256k name=queue1 \
packet-marks=no-mark target=""
add max-limit=5M/25M name="Full Speed" target="" /snmp community set [ find default=yes ] name=hamwan /interface wireless align set receive-all=yes ssid-all=yes /interface wireless connect-list add disabled=yes interface=wlan1 mac-address=6C:3B:6B:16:70:DA security-profile=default add disabled=yes interface=wlan1 mac-address=4C:5E:0C:1F:51:A0 security-profile=default /ip dhcp-client add default-route-distance=10 dhcp-options=hostname,clientid disabled=no interface=ether1 add default-route-distance=5 disabled=no interface=wlan1 /ip dhcp-server network add address=192.168.88.0/24 comment=defconf dns-server=8.8.8.8 gateway=192.168.88.1 /ip dns set servers=8.8.8.8 /ip dns static add address=192.168.88.1 name=router /ip firewall filter add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp add action=accept chain=input comment="defconf: accept established,related" connection-state=\
established,related
add action=drop chain=input comment="defconf: drop all from WAN" disabled=yes in-interface=wlan1 add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related \
disabled=yes
add action=accept chain=forward comment="defconf: accept established,related" connection-state=\
established,related
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface=wlan1
add action=accept chain=input in-interface=wlan1 src-address=24.71.118.152 add action=accept chain=input in-interface=wlan1 src-address=44.135.216.0/23 add action=drop chain=input in-interface=wlan1 /ip firewall nat add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=wlan1 /ip service set ftp address=44.0.0.0/8 /snmp set enabled=yes location="49.895100, -119.392502" trap-version=2 /system clock set time-zone-name=America/Vancouver /system identity set name=VA7STV/QTH2 /system leds set 0 interface=wlan1 /tool bandwidth-server set authenticate=no /tool graphing interface add /tool graphing resource add /tool mac-server add interface=ether1 /tool mac-server mac-winbox add interface=ether1