VE7ROK: Difference between revisions

From OCARC
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 1: Line 1:
VE7ROK
'''VE7ROK'''


146.620 - 600 88.5
'''146.620 - 600 tone squelch 88.5'''




='''DESCRIPTION'''=
='''DESCRIPTION'''=
: The Orchard repeater is located at a private residence.  It consists of a main repeater with two link radios.  The first link is to Penticton via a UHF repeater in Peachland. The second link is via UHF to the Chute Lake club facilities and an IRLP node.
: The Orchard repeater is located at a private residence.  It consists of a main repeater with one link radio.  The link is to Penticton via a UHF repeater in Peachland. Additionally an IRLP node on this repeater is connected to the internet via HAMWAN.
=='''TECHNICAL'''==
=='''TECHNICAL'''==


* Repeater*: Model: Kenwood TKR-750*: Frequency:  146.620 MHz Tone 88.5 Hz*: [http://www.kenwood.com/india/com/lmr/tkr-750_850/spec.html  Specs]
* Repeater*: Model: Kenwood TKR-750*: Frequency:  146.620 - 600 MHz Tone squelch 88.5 Hz*


* Link Radios*: Model: Yeasu FT-7900R Dual band (70cm/2m)*: We use the 1900 baud data port for voice.  This avoids possible level changes from adjusting the volume control.  
* Link Radio*: Model: Yeasu FT-7900R Dual band (70cm/2m)*: We use the 1900 baud data port for voice.  This avoids possible level changes from adjusting the volume control.  


* Controller*: Arcom Controllers RC-210. c/w three port audio delay board. Three port controller fully configurable on each port.  *:: Firmware version 7.361
* Controller*: Arcom Controllers RC-210. c/w three port audio delay board. Three port controller fully configurable on each port.  *:: Firmware version 7.361
Line 16: Line 16:
=='''USAGE'''==
=='''USAGE'''==
:: VE7ROK (146.620- tone squelch 88.5) is
:: VE7ROK (146.620- tone squelch 88.5) is
::# primarily a local chat repeater.  
::# primarily a local chat repeater with continuous UHF link to Penticton Campbell Mountain repeater.
::# the secondary repeater used by the EOC during local emergencies.
::# the secondary repeater used by the EOC during local emergencies. Primary is 146.68- tone squelch 88.5
::# the secondary repeater used for communications during events. (Marathons, triathlons, fund raising walks etc.)  Primary is 146.680- ct 88.5
::# the secondary repeater used for communications during events. (Marathons, triathlons, fund raising walks etc.)  Primary is 146.680- tone squelch 88.5
=='''USER CODES'''==
=='''USER CODES'''==
These are DTMF ™ codes  entered over the air, by the amateur, to arrange the facilities.
These are DTMF ™ codes  entered over the air, by the amateur, to arrange the facilities.


::# A260 Link repeater to IRLP node.  Disconnect link to Penticton.
::# A260 Link repeater to IRLP node.  Disconnect link to Penticton.

Revision as of 19:48, 26 October 2018

VE7ROK

146.620 - 600 tone squelch 88.5


DESCRIPTION

The Orchard repeater is located at a private residence. It consists of a main repeater with one link radio. The link is to Penticton via a UHF repeater in Peachland. Additionally an IRLP node on this repeater is connected to the internet via HAMWAN.

TECHNICAL

  • Repeater*: Model: Kenwood TKR-750*: Frequency: 146.620 - 600 MHz Tone squelch 88.5 Hz*
  • Link Radio*: Model: Yeasu FT-7900R Dual band (70cm/2m)*: We use the 1900 baud data port for voice. This avoids possible level changes from adjusting the volume control.
  • Controller*: Arcom Controllers RC-210. c/w three port audio delay board. Three port controller fully configurable on each port. *:: Firmware version 7.361

USAGE

VE7ROK (146.620- tone squelch 88.5) is
  1. primarily a local chat repeater with continuous UHF link to Penticton Campbell Mountain repeater.
  2. the secondary repeater used by the EOC during local emergencies. Primary is 146.68- tone squelch 88.5
  3. the secondary repeater used for communications during events. (Marathons, triathlons, fund raising walks etc.) Primary is 146.680- tone squelch 88.5

USER CODES

These are DTMF ™ codes entered over the air, by the amateur, to arrange the facilities.


  1. A260 Link repeater to IRLP node. Disconnect link to Penticton.
  2. A262 Link repeater, IRLP, & Penticton together. Send 'On' code to Penticton.
  3. A265 Unlink repeater from Penticton, send 'Off' code to Penticton. Note this isolates the repeater in Peachland.
  4. A111 Say time.