Sector Radio Configuration

From OCARC
Revision as of 15:48, 5 July 2020 by Va7stv (talk | contribs)
Jump to navigation Jump to search

Configuration Steps

When programming this radio for the first time it is generally easier to use the Mac Address of the device to connect to it from winbox, This will ensure that if you remove the current IP address you remain connected to the radio. You can do this by either typing the mac address into the address field or selecting a detected radio by clicking on the mac address column.


  1. Upgrade your modem to the latest version of RouterOS
    • If you have connected the modem to your LAN in a way that provides Internet access, the following two command can be used:
    /system package update install
    Once the system is don upgrading and rebooting run
    /system routerboard upgrade
  2. Reset the modem/radio to a blank configuration
    /system reset-configuration no-defaults=yes
  3. Give the modem/radio a name, for standard sectors this takes the form of RADIOaz.site for example RADIO120.LMK
    /system identity set name=RADIO120.SITE