Difference between revisions of "Client0.Loaner"

From OCARC
Jump to: navigation, search
 
Line 1: Line 1:
 
[[Category:HamWan Equipment Configurations|Sort]]
 
[[Category:HamWan Equipment Configurations|Sort]]
 
<pre>
 
<pre>
[admin@VE7OGO-RADIO0] > /export  
+
[admin@VE7OGO-RADIO0] > /export
# jun/17/2017 13:32:05 by RouterOS 6.35.4
+
# jun/25/2017 08:21:13 by RouterOS 6.35.4
 
# software id = T3IR-71TU
 
# software id = T3IR-71TU
 
#
 
#
 
/interface wireless
 
/interface wireless
set [ find default-name=wlan1 ] band=5ghz-a/n channel-width=10mhz disabled=no \
+
set [ find default-name=wlan1 ] band=5ghz-a/n channel-width=10mhz disabled=no frequency=5900 \
     frequency=5900 frequency-mode=superchannel scan-list=HamWAN ssid=HamWan \
+
     frequency-mode=superchannel scan-list=HamWAN ssid=HamWan tx-power=27 tx-power-mode=all-rates-fixed \
 
     wireless-protocol=nv2
 
     wireless-protocol=nv2
/ip neighbor discovery
 
set wlan1 discover=no
 
 
/interface wireless channels
 
/interface wireless channels
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
+
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
    frequency=5920 list=HamWAN name=Sector1-5 width=5
+
    Sector1-5 width=5
add band=5ghz-onlyn comment=\
+
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
    "Cell sites radiate this at 120 degrees (south-east)" frequency=5900 \
+
     HamWAN name=Sector2-5 width=5
     list=HamWAN name=Sector2-5 width=5
+
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
add band=5ghz-onlyn comment=\
+
     HamWAN name=Sector3-5 width=5
    "Cell sites radiate this at 240 degrees (south-west)" frequency=5880 \
+
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
     list=HamWAN name=Sector3-5 width=5
+
    Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
+
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
    frequency=5920 list=HamWAN name=Sector1-10 width=10
+
     HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment=\
+
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
    "Cell sites radiate this at 120 degrees (south-east)" frequency=5900 \
+
     HamWAN name=Sector3-10 width=10
     list=HamWAN name=Sector2-10 width=10
+
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
add band=5ghz-onlyn comment=\
+
    Sector1-5 width=5
    "Cell sites radiate this at 240 degrees (south-west)" frequency=5880 \
+
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
     list=HamWAN name=Sector3-10 width=10
+
     HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
+
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
    frequency=5920 list=HamWAN name=Sector1-5 width=5
+
     HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment=\
+
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
    "Cell sites radiate this at 120 degrees (south-east)" frequency=5900 \
+
    Sector1-10 width=10
     list=HamWAN name=Sector2-5 width=5
+
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
add band=5ghz-onlyn comment=\
+
     HamWAN name=Sector2-10 width=10
    "Cell sites radiate this at 240 degrees (south-west)" frequency=5880 \
+
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
     list=HamWAN name=Sector3-5 width=5
+
     HamWAN name=Sector3-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
 
    frequency=5920 list=HamWAN name=Sector1-10 width=10
 
add band=5ghz-onlyn comment=\
 
    "Cell sites radiate this at 120 degrees (south-east)" frequency=5900 \
 
     list=HamWAN name=Sector2-10 width=10
 
add band=5ghz-onlyn comment=\
 
    "Cell sites radiate this at 240 degrees (south-west)" frequency=5880 \
 
     list=HamWAN name=Sector3-10 width=10
 
 
/interface wireless security-profiles
 
/interface wireless security-profiles
 
set [ find default=yes ] supplicant-identity=MikroTik
 
set [ find default=yes ] supplicant-identity=MikroTik
Line 53: Line 43:
 
set ssid-all=yes
 
set ssid-all=yes
 
/ip address
 
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether1 network=\
+
add address=192.168.88.1/24 comment=defconf interface=ether1 network=192.168.88.0
    192.168.88.0
 
 
/ip dhcp-client
 
/ip dhcp-client
add comment=defconf dhcp-options=hostname,clientid disabled=no interface=\
+
add comment=defconf dhcp-options=hostname,clientid disabled=no interface=wlan1
    wlan1
 
 
/ip dhcp-server network
 
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
+
add address=192.168.88.0/24 comment=defconf dns-server=8.8.8.8 gateway=192.168.88.1
 
/ip dns
 
/ip dns
set allow-remote-requests=no servers=8.8.8.8
+
set servers=8.8.8.8
 
/ip dns static
 
/ip dns static
 
add address=192.168.88.1 name=router
 
add address=192.168.88.1 name=router
 
/ip firewall filter
 
/ip firewall filter
 
add chain=input comment="defconf: accept ICMP" protocol=icmp
 
add chain=input comment="defconf: accept ICMP" protocol=icmp
add chain=input comment="defconf: accept established,related" \
+
add chain=input comment="defconf: accept established,related" connection-state=established,related
    connection-state=established,related
+
add action=drop chain=input comment="defconf: drop all from WAN" disabled=yes in-interface=wlan1
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
+
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=\
    connection-state=established,related
+
    established,related
add chain=forward comment="defconf: accept established,related" \
+
add chain=forward comment="defconf: accept established,related" connection-state=established,related
    connection-state=established,related
+
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=forward comment="defconf: drop invalid" \
+
add action=drop chain=forward comment="defconf:  drop all from WAN not DSTNATed" connection-nat-state=\
    connection-state=invalid
+
     !dstnat connection-state=new in-interface=wlan1
add action=drop chain=forward comment=\
+
add chain=input in-interface=wlan1 src-address=24.71.118.152
    "defconf:  drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
 
     connection-state=new in-interface=wlan1
 
 
add chain=input in-interface=wlan1 src-address=44.135.216.0/23
 
add chain=input in-interface=wlan1 src-address=44.135.216.0/23
 
add action=drop chain=input in-interface=wlan1
 
add action=drop chain=input in-interface=wlan1
 
 
/ip firewall nat
 
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
+
add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=wlan1
    out-interface=wlan1
 
 
/ip route
 
/ip route
 
add disabled=yes distance=1 gateway=44.135.217.1
 
add disabled=yes distance=1 gateway=44.135.217.1

Latest revision as of 15:11, 25 June 2017

[admin@VE7OGO-RADIO0] > /export
# jun/25/2017 08:21:13 by RouterOS 6.35.4
# software id = T3IR-71TU
#
/interface wireless
set [ find default-name=wlan1 ] band=5ghz-a/n channel-width=10mhz disabled=no frequency=5900 \
    frequency-mode=superchannel scan-list=HamWAN ssid=HamWan tx-power=27 tx-power-mode=all-rates-fixed \
    wireless-protocol=nv2
/interface wireless channels
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
    Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
    HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
    HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
    Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
    HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
    HamWAN name=Sector3-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
    Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
    HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
    HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
    Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
    HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
    HamWAN name=Sector3-10 width=10
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=ether1 name=defconf
/interface wireless align
set ssid-all=yes
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether1 network=192.168.88.0
/ip dhcp-client
add comment=defconf dhcp-options=hostname,clientid disabled=no interface=wlan1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf dns-server=8.8.8.8 gateway=192.168.88.1
/ip dns
set servers=8.8.8.8
/ip dns static
add address=192.168.88.1 name=router
/ip firewall filter
add chain=input comment="defconf: accept ICMP" protocol=icmp
add chain=input comment="defconf: accept established,related" connection-state=established,related
add action=drop chain=input comment="defconf: drop all from WAN" disabled=yes in-interface=wlan1
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=\
    established,related
add chain=forward comment="defconf: accept established,related" connection-state=established,related
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=forward comment="defconf:  drop all from WAN not DSTNATed" connection-nat-state=\
    !dstnat connection-state=new in-interface=wlan1
add chain=input in-interface=wlan1 src-address=24.71.118.152
add chain=input in-interface=wlan1 src-address=44.135.216.0/23
add action=drop chain=input in-interface=wlan1
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=wlan1
/ip route
add disabled=yes distance=1 gateway=44.135.217.1
/system clock
set time-zone-name=America/Vancouver
/system identity
set name=VE7OGO-RADIO0
/system leds
set 0 interface=wlan1
/system routerboard settings
set protected-routerboot=disabled
/tool mac-server
set [ find default=yes ] disabled=yes
add interface=ether1
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes
add interface=ether1