Client0.Loaner

/interface wireless channels
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10

/interface wireless
set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=no \
    frequency=5920 frequency-mode=superchannel ht-rxchains=0,1 ht-txchains=0,1 l2mtu=\
    2290 mode=ap-bridge nv2-cell-radius=100 radio-name=VE7OGO/LNR-RADIO0 ssid=HamWAN \
    tdma-period-size=4 wireless-protocol=nv2 frequency-mode=superchannel

/interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=5mhz disabled=no frequency=5920 mode=ap-bridge nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 ssid=HamWan tdma-period-size=4 wireless-protocol=nv2

/interface wireless
set 0 radio-name="VE7OGO/MOBILE-LMK" # For example, set 0 radio-name="AE7SJ/Monroe-Paine"
/ip address add address=44.135.217.10/24 interface=wlan1 network=44.135.217.0


/interface wireless
set 0 disabled=no frequency-mode=superchannel band=5ghz-onlyn mode=station scan-list=HamWAN ssid=HamWAN wireless-protocol=nv2

/system identity
set name=VE7OGO-RADIO0