RADIO0.KUI
Jump to navigation
Jump to search
Configuration =
# jan/06/1970 15:55:16 by RouterOS 6.35.1 # software id = 3AI0-3ZMS # /interface bridge add name=BRIDGE-HAMWAN-PRIVATE add name=BRIDGE-HAMWAN-PUBLIC /interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=no frequency=5920 frequency-mode=superchannel mode=ap-bridge nv2-cell-radius=100 radio-name=\ VA7DIG/KUI-RADIO0 rx-chains=0,1 ssid=HamWan tdma-period-size=4 tx-chains=0,1 wireless-protocol=nv2 /interface vlan add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601 add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600 /interface wireless channels add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5 add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-5 width=5 add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-5 width=5 add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-10 width=10 add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10 add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10 add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /interface bridge port add comment=defconf interface=ether1 add bridge=BRIDGE-HAMWAN-PUBLIC comment=defconf interface=wlan1 add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE /ip address add address=10.246.3.2/16 interface=BRIDGE-HAMWAN-PRIVATE network=10.246.0.0 /system identity set name=KUI-RADIO0 /system leds set 0 interface=wlan1 /system routerboard settings set cpu-frequency=600MHz init-delay=0s protected-routerboot=disabled