FT70DR Notes

UNDER CONSTRUCTION) (Editing still required for formatting)<brclass="mw_emptyline_first" /><brclass="mw_emptyline" /><brclass="mw_emptyline" /><brclass="mw_emptyline" />FT70DR Operation on WIRES-X Nodes (System Fusion Rooms) (Draft V2 by VE7VZ, Suggestions welcome)<brclass="mw_emptyline_first" />Check your DG-ID (most repeaters usually 00) in menu 63. Setting this menu to AUTO usually works. Once set this does not normally need to be changed.<brclass="mw_emptyline_first" />A WIRES-X NODE listens to the local repeater, and you can use it as a gateway to access the System Fusion Rooms (System Fusion digital modulation is also called C4FM). A ROOM is another name for a reflector, to which a collection of nodes is connected. Multiple nodes and repeaters might be connected together in a single room, and the activity on any node in the room will be heard on all other nodes. <brclass="mw_emptyline_first" />If the node on the local repeater is already connected to a room, no special actions are required. Just talk as normal and you will be heard throughout the room and all connected nodes. If you want to monitor a different room, see below.<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />NODE COMMANDS - CONNECTING TO A NODE<brclass="mw_emptyline_first" />Press F,then immediately press AMS.<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />NODE COMMANDS - REVIEWING INFORMATION ONCE CONNECTED TO A NODE<brclass="mw_emptyline_first" />If connected to the node the first part of the room name should be displayed, then it will scroll if more than 6 characters. If no connection is made, the display will flash "WIRES" for 30 seconds, then time out and return to normal operation.<brclass="mw_emptyline_first" />Rotating the top knob will show several screens of info. Cn - displays room ID (e.g. CQ-CANADA-VE1AO) C0 - stores the most recently accessed room C1,C2,C3,C4,C5 – each memory stores a prefered room number to access En - Allows direct entry to a room (e.g. *40678) where 40678 is the room number. Enter the desired number. Lc - local callsign of the node you are accessing (e.g. VE7KEL-RPT) <brclass="mw_emptyline_first" /><brclass="mw_emptyline" />NODE COMMANDS - CHANGING A ROOM<brclass="mw_emptyline_first" />Select one of C0 thru C5, or En, and press AMS to connect. This automatically disconnects any previous room.<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />Storing a room in memory (C1-C5)<brclass="mw_emptyline_first" />While on the Cn screen and connected to a room, press and hold any key 1 thru 5 to store the room in the corresponding memory<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />Erase a room in memory (C1-C5)<brclass="mw_emptyline_first" />While on one of the memory screens (C1-C5) press and hold HM/RV to erase the memory<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />NODE COMMANDS - DISCONNECT THE NODE FROM A ROOM<brclass="mw_emptyline_first" />Press and hold the BAND key. (Optional. As a courtesy, set it back on the room it was previously connected to when you are finished.)<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />NODE COMMANDS - DISCONNECT YOUR RADIO FROM A NODE<brclass="mw_emptyline_first" />Press and hold MODE key. This exits any node information on screen, and returns the radio to normal use. (***Note that you must be disconnected from the node before you can talk through the node for regular conversation.***)<brclass="mw_emptyline_first" /><brclass="mw_emptyline" /><brclass="mw_emptyline" />LATEST WIRES-X ACTIVE ROOM ID LIST<brclass="mw_emptyline_first" /><a href="https://www.yaesu.com/jp/en/wires-x/id/active_room.php">https://www.yaesu.com/jp/en/wires-x/id/active_room.php</a><brdata-mce-bogus="1" />

<brdata-mce-bogus="1" />

A Sampling of Common Rooms Connected<brdata-attributes="" />Room ID DTMF# Nodes Room Name Hosted in Country<brdata-attributes="" />------- ----- ------ ---- -------- -------<brdata-attributes="" />CQ-CANADA-VE1AO 40678 022 CQ-CANADA-VE1AO Truro, Nova Scotia Canada www.cqcanada.com Net Wed 6PM Pacific<brdata-attributes="" />----CANADA-LINK 40505 005 OTTAWA VE3ORF GROUP Ottawa, Ontario Canada Linked System of Repeaters and Nightly HF Net<brdata-attributes="" />-----------CQ-UK 27793 032 CQ-UK Pudsey, West Yorkshire UK XLX925A ALL MODES <brdata-attributes="" />----AMERICA-LINK 21080 111 America Link Network Beaumont, Texas USA America Link Network-Central<brdata-attributes="" />CQ-AMERICA 21000 006 CQ AMERICA Shinagawa-ku,Tokyo Japan CQ Room for America by YAESU MUSEN.<brdata-attributes="" />CQ-KAMLOOPS-BC 45028 001 CQ-KAMLOOPS-BC Kamloops, BC Canada Kamloops Hang Out<brdata-attributes="" />CQ-VICTORIA-BC 21422 002 CQ-VICTORIA-BC Sooke, BC Canada CRD Emergency Program - Wires-X HRI200<brdata-attributes="" />BC-NORTH-C4FM 43363 001 BC-NORTH-C4FM Terrace, BC Canada All stations welcome. <brdata-attributes="" />AUS-REPEATER-NET 24160 011 AUS-REPEATER-NET Melbourne, Victoria Australia AUS-REPEATER-NET<brdata-attributes="" />MNWIS-FUSION 21493 025 MNWis Fusion Network Lino Lakes,MN USA MN and WI Fusion. Tech Net Mon 7:30Central <brdata-attributes="" />LA-REPEATER 21042 010 LA REPEATER Mt. Wilson,CA USA www.socalham.com<brdata-mce-bogus="1" />

<brclass="mw_emptyline_first" />Note that when local repeater 444.500+ VE7KEL is disconnected from any room, it will automatically reconnect by default to the Canada Room (CQ-CANADA-VE1AO) within about 15 seconds.<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />FT70DR Other Basic Functions (rotating the top knob changes most options once selected)<brclass="mw_emptyline_first" />Set Power - Hi/Mid/Low - Press F, press 1 Start Scan - Press F, press 2 Stop Scan - Press BAND Set Offset - +/-/simplex - Press F, press 0 VFO/Memory toggle - V/M Check input frequency - Press HM/RV (Menu 26 must be set to REV)<brclass="mw_emptyline_first" />Toggle Mode - VW/DN/FM - Press MODE (Menu 16 DIG VW must be set to ON to allow for VW) Toggle AMS - hold AMS button Set Freq Step - Press F, press 4 (5/10/15 etc or set to AUTO) Set Tone Squelch Type - Press F, press 5 (usually select NONE/TONE/TSQL) Select Tone Frequency - Press F, press 6 (won't work unless TONE/TSQL set above) Skip Memory - select memory, press F, press 9 (small triangle in top left indicates skip) Set Squelch Level - (Menu 44 RF SQL S1-S9) OR Press F, press MONI (button on left side)(1-15) Direct Frequency Entry in VFO - press number keys for frequency Direct Memory Selection in MEM - press number keys for memory channel Write VFO to Memory - Hold V/M, select channel with knob, Hold V/M, (enter optional label), Hold V/M. Delete Memory - Hold V/M, select memory to delete, press AMS, press AMS.<brclass="mw_emptyline_first" />Access Menu Options - Hold F<brclass="mw_emptyline_first" />small blinking box at bottom of display - position indicates squelch setting from 1 to 9. small "T" at top - CTCSS tone encode – is set to transmit a specific tone for repeaters which require one small "T SQ" at top - CTCSS tone decode - is set to open the squelch only when the orrect tone is received (VE7VZ FT70DR-WIRES-X-NotesV2.odt)