RADIO0.LMK: Difference between revisions
Jump to navigation
Jump to search
(Created page with "<pre> /interface wireless channels add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5 add band=5ghz-...") |
No edit summary |
||
Line 10: | Line 10: | ||
/interface wireless | /interface wireless | ||
set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width= | set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=no \ | ||
frequency=5920 frequency-mode=superchannel ht-rxchains=0,1 ht-txchains=0,1 l2mtu=\ | frequency=5920 frequency-mode=superchannel ht-rxchains=0,1 ht-txchains=0,1 l2mtu=\ | ||
2290 mode=ap-bridge nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 ssid=HamWAN \ | 2290 mode=ap-bridge nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 ssid=HamWAN \ | ||
tdma-period-size=4 wireless-protocol=nv2 | tdma-period-size=4 wireless-protocol=nv2 frequency-mode=superchannel | ||
/interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=5mhz disabled=no frequency=5920 mode=ap-bridge nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 ssid=HamWan tdma-period-size=4 wireless-protocol=nv2 | |||
/ip address | /ip address |
Revision as of 22:16, 11 June 2017
/interface wireless channels add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5 add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-5 width=5 add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-5 width=5 add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-10 width=10 add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10 add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10 /interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=no \ frequency=5920 frequency-mode=superchannel ht-rxchains=0,1 ht-txchains=0,1 l2mtu=\ 2290 mode=ap-bridge nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 ssid=HamWAN \ tdma-period-size=4 wireless-protocol=nv2 frequency-mode=superchannel /interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=5mhz disabled=no frequency=5920 mode=ap-bridge nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 ssid=HamWan tdma-period-size=4 wireless-protocol=nv2 /ip address add address=10.246.1.2/16 interface=ether1 network=10.246.0.0 /system identity set name=LMK-RADIO0