HEX1.KUI: Difference between revisions
Jump to navigation
Jump to search
(→Ports) |
|||
Line 29: | Line 29: | ||
== Configuration == | == Configuration == | ||
{{Alert | type= | {{Alert | type=warning | message = This configuration has not been tested on a physical device}} | ||
{{Alert | type= | {{Alert | type=warning | message = This configuration is a work in progress}} | ||
<pre> | <pre> | ||
Revision as of 23:55, 3 July 2017
Ports
DC IN | SFP |
eth1 PoE IN |
eth2 PoE OUT |
eth3 PoE OUT |
eth4 PoE OUT |
eth5 PoE OUT | |
---|---|---|---|---|---|---|---|
not used | not used | not used | not used | not used | not used | ||
Power | no | 12v battery |
Configuration
This configuration has not been tested on a physical device
This configuration is a work in progress
/interface bridge add name=BRIDGE-HAMWAN-PRIVATE add name=BRIDGE-HAMWAN-PUBLIC /ip neighbor discovery set ether1 discover=no /interface vlan add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601 add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600 add interface=ether2 name=ETH2-HAMWAN-PRIVATE vlan-id=601 add interface=ether2 name=ETH2-HAMWAN-PUBLIC vlan-id=600 add interface=ether3 name=ETH3-HAMWAN-PRIVATE vlan-id=601 add interface=ether3 name=ETH3-HAMWAN-PUBLIC vlan-id=600 add interface=ether4 name=ETH4-HAMWAN-PRIVATE vlan-id=601 add interface=ether4 name=ETH4-HAMWAN-PUBLIC vlan-id=600 add interface=ether5 name=ETH5-HAMWAN-PRIVATE vlan-id=601 add interface=ether5 name=ETH5-HAMWAN-PUBLIC vlan-id=600 add interface=sfp1 name=SFP1-HAMWAN-PRIVATE vlan-id=601 add interface=sfp1 name=SFP1-HAMWAN-PUBLIC vlan-id=600 /ip hotspot profile set [ find default=yes ] html-directory=flash/hotspot /interface bridge port add comment=defconf interface=ether2 add comment=defconf interface=sfp1 add bridge=BRIDGE-HAMWAN-PUBLIC interface=SFP1-HAMWAN-PUBLIC add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH2-HAMWAN-PUBLIC add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH3-HAMWAN-PUBLIC add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH4-HAMWAN-PUBLIC add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH5-HAMWAN-PUBLIC add bridge=BRIDGE-HAMWAN-PRIVATE interface=SFP1-HAMWAN-PRIVATE add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH2-HAMWAN-PRIVATE add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH3-HAMWAN-PRIVATE add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH4-HAMWAN-PRIVATE add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH5-HAMWAN-PRIVATE /ip address add address=10.246.1.1/16 comment=defconf interface=BRIDGE-HAMWAN-PRIVATE \ network=10.246.0.0 /ip dhcp-client add comment=defconf dhcp-options=hostname,clientid disabled=no interface=\ ether1 /ip dns set allow-remote-requests=yes /ip dns static add address=192.168.88.1 name=router /ip firewall filter add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp add action=accept chain=input comment="defconf: accept established,related" \ connection-state=established,related add action=drop chain=input comment="defconf: drop all from WAN" \ in-interface=ether1 add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \ connection-state=established,related add action=accept chain=forward comment="defconf: accept established,related" \ connection-state=established,related add action=drop chain=forward comment="defconf: drop invalid" \ connection-state=invalid add action=drop chain=forward comment=\ "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \ connection-state=new in-interface=ether1 /ip firewall nat add action=masquerade chain=srcnat comment="defconf: masquerade" \ out-interface=ether1 /system routerboard settings set cpu-frequency=800MHz protected-routerboot=disabled /tool mac-server set [ find default=yes ] disabled=yes add /tool mac-server mac-winbox set [ find default=yes ] disabled=yes add [admin@MikroTik] >