Client0.Loaner: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
[[Category:HamWan Equipment Configurations|Sort]] | [[Category:HamWan Equipment Configurations|Sort]] | ||
<pre> | <pre> | ||
[admin@VE7OGO-RADIO0] > /export | |||
# jun/25/2017 08:21:13 by RouterOS 6.35.4 | |||
# software id = T3IR-71TU | |||
# | |||
/interface wireless | |||
set [ find default-name=wlan1 ] band=5ghz-a/n channel-width=10mhz disabled=no frequency=5900 \ | |||
frequency-mode=superchannel scan-list=HamWAN ssid=HamWan tx-power=27 tx-power-mode=all-rates-fixed \ | |||
wireless-protocol=nv2 | |||
/interface wireless channels | /interface wireless channels | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5 | add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\ | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-5 width=5 | Sector1-5 width=5 | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-5 width=5 | add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\ | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-10 width=10 | HamWAN name=Sector2-5 width=5 | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10 | add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\ | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10 | HamWAN name=Sector3-5 width=5 | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\ | |||
Sector1-10 width=10 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\ | |||
HamWAN name=Sector2-10 width=10 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\ | |||
HamWAN name=Sector3-10 width=10 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\ | |||
/interface wireless set [ find default-name= | Sector1-5 width=5 | ||
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\ | |||
HamWAN name=Sector2-5 width=5 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\ | |||
HamWAN name=Sector3-5 width=5 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\ | |||
Sector1-10 width=10 | |||
/ | add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\ | ||
HamWAN name=Sector2-10 width=10 | |||
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\ | |||
HamWAN name=Sector3-10 width=10 | |||
/interface wireless security-profiles | |||
set [ find default=yes ] supplicant-identity=MikroTik | |||
/ip pool | |||
add name=dhcp ranges=192.168.88.10-192.168.88.254 | |||
/ip dhcp-server | |||
add address-pool=dhcp disabled=no interface=ether1 name=defconf | |||
/interface wireless align | |||
set ssid-all=yes | |||
/ip address | |||
add address=192.168.88.1/24 comment=defconf interface=ether1 network=192.168.88.0 | |||
/ip dhcp-client | |||
add comment=defconf dhcp-options=hostname,clientid disabled=no interface=wlan1 | |||
/ip dhcp-server network | |||
add address=192.168.88.0/24 comment=defconf dns-server=8.8.8.8 gateway=192.168.88.1 | |||
/ip dns | |||
set servers=8.8.8.8 | |||
/ip dns static | |||
add address=192.168.88.1 name=router | |||
/ip firewall filter | |||
add chain=input comment="defconf: accept ICMP" protocol=icmp | |||
add chain=input comment="defconf: accept established,related" connection-state=established,related | |||
add action=drop chain=input comment="defconf: drop all from WAN" disabled=yes in-interface=wlan1 | |||
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=\ | |||
established,related | |||
add chain=forward comment="defconf: accept established,related" connection-state=established,related | |||
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid | |||
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=\ | |||
!dstnat connection-state=new in-interface=wlan1 | |||
add chain=input in-interface=wlan1 src-address=24.71.118.152 | |||
add chain=input in-interface=wlan1 src-address=44.135.216.0/23 | |||
add action=drop chain=input in-interface=wlan1 | |||
/ip firewall nat | |||
add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=wlan1 | |||
/ip route | |||
add disabled=yes distance=1 gateway=44.135.217.1 | |||
/system clock | |||
set time-zone-name=America/Vancouver | |||
/system identity | /system identity | ||
set name=VE7OGO-RADIO0 | set name=VE7OGO-RADIO0 | ||
/system leds | |||
set 0 interface=wlan1 | |||
/system routerboard settings | |||
set protected-routerboot=disabled | |||
/tool mac-server | |||
set [ find default=yes ] disabled=yes | |||
add interface=ether1 | |||
/tool mac-server mac-winbox | |||
set [ find default=yes ] disabled=yes | |||
add interface=ether1 | |||
</pre> | </pre> | ||
Latest revision as of 15:11, 25 June 2017
[admin@VE7OGO-RADIO0] > /export
# jun/25/2017 08:21:13 by RouterOS 6.35.4
# software id = T3IR-71TU
#
/interface wireless
set [ find default-name=wlan1 ] band=5ghz-a/n channel-width=10mhz disabled=no frequency=5900 \
frequency-mode=superchannel scan-list=HamWAN ssid=HamWan tx-power=27 tx-power-mode=all-rates-fixed \
wireless-protocol=nv2
/interface wireless channels
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
HamWAN name=Sector3-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\
Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=\
HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=\
HamWAN name=Sector3-10 width=10
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=ether1 name=defconf
/interface wireless align
set ssid-all=yes
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether1 network=192.168.88.0
/ip dhcp-client
add comment=defconf dhcp-options=hostname,clientid disabled=no interface=wlan1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf dns-server=8.8.8.8 gateway=192.168.88.1
/ip dns
set servers=8.8.8.8
/ip dns static
add address=192.168.88.1 name=router
/ip firewall filter
add chain=input comment="defconf: accept ICMP" protocol=icmp
add chain=input comment="defconf: accept established,related" connection-state=established,related
add action=drop chain=input comment="defconf: drop all from WAN" disabled=yes in-interface=wlan1
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=\
established,related
add chain=forward comment="defconf: accept established,related" connection-state=established,related
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=\
!dstnat connection-state=new in-interface=wlan1
add chain=input in-interface=wlan1 src-address=24.71.118.152
add chain=input in-interface=wlan1 src-address=44.135.216.0/23
add action=drop chain=input in-interface=wlan1
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=wlan1
/ip route
add disabled=yes distance=1 gateway=44.135.217.1
/system clock
set time-zone-name=America/Vancouver
/system identity
set name=VE7OGO-RADIO0
/system leds
set 0 interface=wlan1
/system routerboard settings
set protected-routerboot=disabled
/tool mac-server
set [ find default=yes ] disabled=yes
add interface=ether1
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes
add interface=ether1