Proxmox VE/IBM-306m: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
'''Installing PVE 5.2 on ibm 306m''' | '''Installing PVE 5.2 on ibm 306m''' | ||
Install Debian 9.4 (Stretch) Release <br>use lvm<br> | Install Debian 9.4 (Stretch) Release <br>use lvm<br> | ||
disable X desktop | disable X desktop | ||
disable print | disable print | ||
enable ssh server | enable ssh server | ||
enable standard | enable standard | ||
Once install is complete; | Once install is complete; | ||
| Line 13: | Line 12: | ||
Enable non-free package source: | Enable non-free package source: | ||
apt-get install software-properties-common | |||
add-apt-repository non-free | |||
Update the packages | Update the packages | ||
| Line 20: | Line 19: | ||
Install a few management packages: | Install a few management packages: | ||
apt-get install sudo snmpd snmp-mibs-downloader ipmitool freeipmi-tools | apt-get install sudo snmpd snmp-mibs-downloader ipmitool freeipmi-tools lm-sensors | ||
Add the kernel modules for IPMI | Add the kernel modules for IPMI | ||
| Line 28: | Line 27: | ||
modprobe ipmi_poweroff | modprobe ipmi_poweroff | ||
modprobe ipmi_watchdog | modprobe ipmi_watchdog | ||
modprobe smsc47m1 | |||
modprobe smsc47m192 | |||
modprobe lm85 | |||
Configure IPMI if not already configured in the bios (BMC must be ENABLED in the bios) | Configure IPMI if not already configured in the bios (BMC must be ENABLED in the bios) | ||
| Line 42: | Line 44: | ||
############################################################################### | ############################################################################### | ||
# | # | ||
# | # AGENT BEHAVIOUR | ||
# | # | ||
# | # Listen for connections from the local system only | ||
#agentAddress | #agentAddress udp:127.0.0.1:161 | ||
# | # Listen for connections on all interfaces (both IPv4 *and* IPv6) | ||
agentAddress udp:161,udp6:[::1]:161 | agentAddress udp:161,udp6:[::1]:161 | ||
| Line 64: | Line 66: | ||
For configuring Ceph the following guide should be used <br>https://pve.proxmox.com/wiki/Ceph_Server#Installation_of_Proxmox_VE | For configuring Ceph the following guide should be used <br>https://pve.proxmox.com/wiki/Ceph_Server#Installation_of_Proxmox_VE | ||
== Ceph Loop Hacks == | ==Ceph Loop Hacks== | ||
THIS IS PROBABLY DANGEROUS PROCEED WITH CAUTION | THIS IS PROBABLY DANGEROUS PROCEED WITH CAUTION | ||
mkdir /ceph-osd | |||
fallocate -l 40G /ceph-osd/vdisk1.img | |||
losetup /dev/loop101 /ceph-osd/vdisk101.img # Start loop devices at 100 to avoid interfering with VMs | |||
ceph-disk prepare --zap-disk --cluster ceph --cluster-uuid 37048cb8-34cd-4525-9da9-6db9a1c89f80 --bluestore --osd-id {osd-id to use} /dev/loop101 | |||
ceph-disk activate /dev/loop101 | |||
It may be worthwhile to follow the systemd.link process to wire (and rename) int interfaces to that regardless of the machine type that we have constant expectaions. | It may be worthwhile to follow the systemd.link process to wire (and rename) int interfaces to that regardless of the machine type that we have constant expectaions. see https://www.freedesktop.org/software/systemd/man/systemd.link.html for more information | ||
Revision as of 00:18, 6 July 2018
Installing PVE 5.2 on ibm 306m
Install Debian 9.4 (Stretch) Release
use lvm
disable X desktop disable print enable ssh server enable standard
Once install is complete; Ensure all of the required networking is setup. enp4s0 should be on the public (600) vlan, enp5s0 on the private (601) vlan. If you forgot to deselect X desktop during install, then disable gdm, this is best done by: systemctl set-default multi-user.target
Enable non-free package source:
apt-get install software-properties-common add-apt-repository non-free
Update the packages
apt-get update
Install a few management packages:
apt-get install sudo snmpd snmp-mibs-downloader ipmitool freeipmi-tools lm-sensors
Add the kernel modules for IPMI
modprobe ipmi_si type=kcs ports=0xCA2 regspacings=1 modprobe ipmi_devintf modprobe ipmi_msghandler modprobe ipmi_poweroff modprobe ipmi_watchdog modprobe smsc47m1 modprobe smsc47m192 modprobe lm85
Configure IPMI if not already configured in the bios (BMC must be ENABLED in the bios)
ipmitool -I open lan set 1 ipsrc static ipmitool -I open lan set 1 ipaddr 10.246.254.XXX ipmitool -I open lan set 1 netmask 255.255.0.0 ipmitool -I open lan set 1 defgw ipaddr 10.246.0.1 ipmitool -I open lan set 1 access on ipmitool -I open user set password 2 STRONG_SHARED_PASSWORD ipmitool lan print
Make it so that snmpd listens on all interfaces (edit /etc/snmp/snmpd.conf)
############################################################################### # # AGENT BEHAVIOUR # # Listen for connections from the local system only #agentAddress udp:127.0.0.1:161 # Listen for connections on all interfaces (both IPv4 *and* IPv6) agentAddress udp:161,udp6:[::1]:161
Install the librenms agent for Proxxmox VE host monitoring:
wget https://raw.githubusercontent.com/librenms/librenms-agent/master/agent-local/proxmox -O /usr/local/bin/librenms-agent-proxmox chmod +x /usr/local/bin/librenms-agent-proxmox echo "extend proxmox /usr/local/bin/librenms-agent-proxmox" >> /etc/snmp/snmpd.conf service snmpd restart
We are now ready to install Proxmox VE
follow the instructions here:
https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Stretch
remove the PVE subscription source
rm /etc/apt/sources.list.d/pve-enterprise.list
For configuring Ceph the following guide should be used
https://pve.proxmox.com/wiki/Ceph_Server#Installation_of_Proxmox_VE
Ceph Loop Hacks
THIS IS PROBABLY DANGEROUS PROCEED WITH CAUTION
mkdir /ceph-osd fallocate -l 40G /ceph-osd/vdisk1.img losetup /dev/loop101 /ceph-osd/vdisk101.img # Start loop devices at 100 to avoid interfering with VMs
ceph-disk prepare --zap-disk --cluster ceph --cluster-uuid 37048cb8-34cd-4525-9da9-6db9a1c89f80 --bluestore --osd-id {osd-id to use} /dev/loop101
ceph-disk activate /dev/loop101
It may be worthwhile to follow the systemd.link process to wire (and rename) int interfaces to that regardless of the machine type that we have constant expectaions. see https://www.freedesktop.org/software/systemd/man/systemd.link.html for more information