HSWAN VA7STV's Notes

This page notes and serves as a record of my own experiments and configurations

Test Sector Config # jan/02/1970 02:04:51 by RouterOS 6.29 # /interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=5mhz disabled=no \ frequency=5880 frequency-mode=superchannel ht-rxchains=0,1 ht-txchains=0,1 l2mtu=\ 2290 mode=ap-bridge nv2-cell-radius=100 radio-name=K7WAN/ETiger-S3 ssid=HamWAN \ tdma-period-size=4 wireless-protocol=nv2 /interface vrrp add authentication=ah interface=ether1 name=vrrp1 password=<VRRP-KEY> version=2 /interface wireless channels add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=\ 5920 list=HamWAN name=Sector1-5 width=5 add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" \ frequency=5900 list=HamWAN name=Sector2-5 width=5 add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" \ frequency=5880 list=HamWAN name=Sector3-5 width=5 add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=\ 5920 list=HamWAN name=Sector1-10 width=10 add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" \ frequency=5900 list=HamWAN name=Sector2-10 width=10 add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" \ frequency=5880 list=HamWAN name=Sector3-10 width=10 /ip pool add name=pool1 ranges=44.24.241.146-44.24.241.158 /ip dhcp-server add address-pool=pool1 disabled=no interface=wlan1 lease-time=1h name=dhcp1 /routing ospf instance set [ find default=yes ] distribute-default=if-installed-as-type-1 in-filter=\ AMPR-default out-filter=AMPR-default redistribute-connected=as-type-1 \ redistribute-other-ospf=as-type-1 redistribute-static=as-type-1 router-id=\ 44.24.241.134 /snmp community set [ find default=yes ] addresses=44.24.240.0/20 name=hamwan /system logging action set 3 remote=44.24.255.4 /ip settings set send-redirects=no /ip address add address=44.24.241.134/28 interface=ether1 network=44.24.241.128 add address=44.24.241.145/28 interface=wlan1 network=44.24.241.144 add address=44.24.241.142 interface=vrrp1 network=44.24.241.142 /ip dhcp-server network add address=44.24.241.144/28 dns-server=44.24.244.1,44.24.245.1 domain=HamWAN.net \ gateway=44.24.241.145 netmask=28 ntp-server=44.24.244.4,44.24.245.4 /ip firewall mangle add action=change-mss chain=output new-mss=1378 protocol=tcp tcp-flags=syn tcp-mss=!0-1378 add action=change-mss chain=forward new-mss=1378 protocol=tcp tcp-flags=syn tcp-mss=!0-1378 /ip service set ssh port=222 /routing filter add action=accept chain=HamWAN prefix=44.24.240.0/20 prefix-length=20-32 add action=reject chain=HamWAN add action=accept chain=HamWAN-default prefix=44.24.240.0/20 prefix-length=20-32 add action=accept chain=HamWAN-default prefix=0.0.0.0/0 add action=reject chain=HamWAN-default add action=accept chain=AMPR-default prefix=44.0.0.0/8 prefix-length=8-32 add action=accept chain=AMPR-default prefix=0.0.0.0/0 add action=reject chain=AMPR-default add action=accept chain=AMPR prefix=44.0.0.0/8 prefix-length=8-32 add action=reject chain=AMPR /routing ospf interface add authentication=md5 authentication-key=<OSPF-KEY> interface=ether1 network-type=broadcast /routing ospf network add area=backbone network=44.24.241.128/28 /snmp set contact="#HamWAN on irc.freenode.org" enabled=yes /system clock set time-zone-autodetect=no time-zone-name=GMT /system identity set name=ETiger-S3 /system logging add action=remote topics=!debug,!snmp /system ntp client set enabled=yes primary-ntp=44.24.244.4 secondary-ntp=44.24.245.4