FT70DR Notes: Difference between revisions

From OCARC
Jump to navigation Jump to search
No edit summary
(Undo revision 2090 by Ve7vz (talk))
Tag: Undo
Line 1: Line 1:
'''UNDER CONSTRUCTION)'''  (Editing still required for formatting)<brclass="mw_emptyline_first" /><brclass="mw_emptyline" /><brclass="mw_emptyline" /><brclass="mw_emptyline" />'''FT70DR Operation on WIRES-X Nodes (System Fusion Rooms) ''' (Draft V2 by VE7VZ, Suggestions welcome)<brclass="mw_emptyline_first" />Check your DG-ID (most repeaters usually 00) in menu 63. Setting this menu to AUTO usually works. Once set this does not normally need to be changed.<brclass="mw_emptyline_first" />A WIRES-X NODE listens to the local repeater, and you can use it as a gateway to access the System Fusion Rooms (System Fusion digital modulation is also called C4FM).
'''UNDER CONSTRUCTION)'''  (Editing still required for formatting)
A ROOM is another name for a reflector, to which a collection of nodes is connected. Multiple nodes and repeaters might be connected together in a single room, and the activity on any node in the room will be heard on all other nodes. <brclass="mw_emptyline_first" />If the node on the local repeater is already connected to a room, no special actions are required. Just talk as normal and you will be heard throughout the room and all connected nodes. If you want to monitor a different room, see below.<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />'''NODE COMMANDS - CONNECTING TO A NODE'''<brclass="mw_emptyline_first" />Press F,then immediately press AMS.<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />'''NODE COMMANDS - REVIEWING INFORMATION ONCE CONNECTED TO A NODE'''<brclass="mw_emptyline_first" />If connected to the node the first part of the room name should be displayed, then it will scroll if more than 6 characters.
 
If no connection is made, the display will flash "WIRES" for 30 seconds, then time out and return to normal operation.<brclass="mw_emptyline_first" />Rotating the top knob will show several screens of info.
 
 
 
'''FT70DR Operation on WIRES-X Nodes (System Fusion Rooms) ''' (Draft V2 by VE7VZ, Suggestions welcome)
 
Check your DG-ID (most repeaters usually 00) in menu 63. Setting this menu to AUTO usually works. Once set this does not normally need to be changed.
 
A WIRES-X NODE listens to the local repeater, and you can use it as a gateway to access the System Fusion Rooms (System Fusion digital modulation is also called C4FM).
A ROOM is another name for a reflector, to which a collection of nodes is connected. Multiple nodes and repeaters might be connected together in a single room, and the activity on any node in the room will be heard on all other nodes.  
 
If the node on the local repeater is already connected to a room, no special actions are required. Just talk as normal and you will be heard throughout the room and all connected nodes. If you want to monitor a different room, see below.
 
 
'''NODE COMMANDS - CONNECTING TO A NODE'''
 
Press F,then immediately press AMS.
 
 
'''NODE COMMANDS - REVIEWING INFORMATION ONCE CONNECTED TO A NODE'''
 
If connected to the node the first part of the room name should be displayed, then it will scroll if more than 6 characters.
If no connection is made, the display will flash "WIRES" for 30 seconds, then time out and return to normal operation.
 
Rotating the top knob will show several screens of info.
Cn - displays room ID (e.g. CQ-CANADA-VE1AO)
Cn - displays room ID (e.g. CQ-CANADA-VE1AO)
C0 - stores the most recently accessed room
C0 - stores the most recently accessed room
C1,C2,C3,C4,C5 – each memory stores a prefered room number to access
C1,C2,C3,C4,C5 – each memory stores a prefered room number to access
En - Allows direct entry to a room (e.g. *40678) where 40678 is the room number. Enter the desired number.
En - Allows direct entry to a room (e.g. *40678) where 40678 is the room number. Enter the desired number.
Lc - local callsign of the node you are accessing (e.g. VE7KEL-RPT) <brclass="mw_emptyline_first" /><brclass="mw_emptyline" />'''NODE COMMANDS - CHANGING A ROOM'''<brclass="mw_emptyline_first" />Select one of C0 thru C5, or En, and press AMS to connect. This automatically disconnects any previous room.<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />''Storing a room in memory (C1-C5)''<brclass="mw_emptyline_first" />While on the Cn screen and connected to a room, press and hold any key 1 thru 5 to store the room in the corresponding memory<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />''Erase a room in memory (C1-C5)''<brclass="mw_emptyline_first" />While on one of the memory screens (C1-C5) press and hold HM/RV to erase the memory<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />'''NODE COMMANDS - DISCONNECT THE NODE FROM A ROOM'''<brclass="mw_emptyline_first" />Press and hold the BAND key.  (Optional. As a courtesy, set it back on the room it was previously connected to when you are finished.)<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />'''NODE COMMANDS - DISCONNECT YOUR RADIO FROM A NODE'''<brclass="mw_emptyline_first" />Press and hold MODE key.
Lc - local callsign of the node you are accessing (e.g. VE7KEL-RPT)  
 
 
'''NODE COMMANDS - CHANGING A ROOM'''
 
Select one of C0 thru C5, or En, and press AMS to connect. This automatically disconnects any previous room.
 
 
''Storing a room in memory (C1-C5)''
 
While on the Cn screen and connected to a room, press and hold any key 1 thru 5 to store the room in the corresponding memory
 
 
''Erase a room in memory (C1-C5)''
 
While on one of the memory screens (C1-C5) press and hold HM/RV to erase the memory
 
 
'''NODE COMMANDS - DISCONNECT THE NODE FROM A ROOM'''
 
Press and hold the BAND key.  (Optional. As a courtesy, set it back on the room it was previously connected to when you are finished.)
 
 
'''NODE COMMANDS - DISCONNECT YOUR RADIO FROM A NODE'''
 
Press and hold MODE key.
This exits any node information on screen, and returns the radio to normal use.
This exits any node information on screen, and returns the radio to normal use.
(***Note that you must be disconnected from the node before you can talk through the node for regular conversation.***)<brclass="mw_emptyline_first" /><brclass="mw_emptyline" /><brclass="mw_emptyline" />'''LATEST WIRES-X ACTIVE ROOM ID LIST'''<brclass="mw_emptyline_first" /><a href="https://www.yaesu.com/jp/en/wires-x/id/active_room.php">https://www.yaesu.com/jp/en/wires-x/id/active_room.php</a><brdata-mce-bogus="1" />
(***Note that you must be disconnected from the node before you can talk through the node for regular conversation.***)




<brdata-mce-bogus="1" />


'''LATEST WIRES-X ACTIVE ROOM ID LIST'''


A Sampling of Common Rooms Connected<brdata-attributes="" />Room ID  DTMF# Nodes Room Name  Hosted in  Country<brdata-attributes="" />-------  ----- ------ ----  --------  -------<brdata-attributes="" />CQ-CANADA-VE1AO  40678 022 CQ-CANADA-VE1AO  Truro, Nova Scotia Canada  www.cqcanada.com Net Wed 6PM Pacific<brdata-attributes="" />----CANADA-LINK  40505 005 OTTAWA VE3ORF GROUP Ottawa, Ontario  Canada  Linked System of Repeaters and Nightly HF Net<brdata-attributes="" />-----------CQ-UK 27793 032 CQ-UK  Pudsey, West Yorkshire UK  XLX925A ALL MODES <brdata-attributes="" />----AMERICA-LINK 21080 111 America Link Network Beaumont, Texas  USA  America Link Network-Central<brdata-attributes="" />CQ-AMERICA  21000 006 CQ AMERICA  Shinagawa-ku,Tokyo Japan  CQ Room for America by YAESU MUSEN.<brdata-attributes="" />CQ-KAMLOOPS-BC  45028 001 CQ-KAMLOOPS-BC  Kamloops, BC  Canada  Kamloops Hang Out<brdata-attributes="" />CQ-VICTORIA-BC  21422 002 CQ-VICTORIA-BC  Sooke, BC  Canada  CRD Emergency Program - Wires-X HRI200<brdata-attributes="" />BC-NORTH-C4FM  43363 001 BC-NORTH-C4FM  Terrace, BC  Canada  All stations welcome. <brdata-attributes="" />AUS-REPEATER-NET 24160 011 AUS-REPEATER-NET Melbourne, Victoria Australia AUS-REPEATER-NET<brdata-attributes="" />MNWIS-FUSION  21493 025 MNWis Fusion Network Lino Lakes,MN  USA  MN and WI Fusion. Tech Net Mon 7:30Central <brdata-attributes="" />LA-REPEATER  21042 010 LA REPEATER  Mt. Wilson,CA  USA  www.socalham.com<brdata-mce-bogus="1" />
https://www.yaesu.com/jp/en/wires-x/id/active_room.php


A Sampling of Common Rooms Connected
Room ID DTMF# Nodes Room Name Hosted in Country


<brclass="mw_emptyline_first" />Note that when local repeater 444.500+ VE7KEL is disconnected from any room, it will automatically reconnect by default to the Canada Room (CQ-CANADA-VE1AO) within about 15 seconds.<brclass="mw_emptyline_first" /><brclass="mw_emptyline" />'''FT70DR Other Basic  Functions (rotating the top knob changes most options once selected)'''<brclass="mw_emptyline_first" />Set Power - Hi/Mid/Low - Press F, press 1
------- ----- ------ ---- -------- -------CQ-CANADA-VE1AO 40678 022 CQ-CANADA-VE1AO Truro, Nova Scotia Canada www.cqcanada.com Net Wed 6PM Pacific
 
----CANADA-LINK 40505 005 OTTAWA VE3ORF GROUP Ottawa, Ontario Canada Linked System of Repeaters and Nightly HF Net
 
-----------CQ-UK 27793 032 CQ-UK Pudsey, West Yorkshire UK XLX925A ALL MODES
 
----AMERICA-LINK 21080 111 America Link Network Beaumont, Texas USA America Link Network-Central
CQ-AMERICA 21000 006 CQ AMERICA Shinagawa-ku,Tokyo Japan CQ Room for America by YAESU MUSEN.
CQ-KAMLOOPS-BC 45028 001 CQ-KAMLOOPS-BC Kamloops, BC Canada Kamloops Hang Out
CQ-VICTORIA-BC 21422 002 CQ-VICTORIA-BC Sooke, BC Canada CRD Emergency Program - Wires-X HRI200
BC-NORTH-C4FM 43363 001 BC-NORTH-C4FM Terrace, BC Canada All stations welcome.
AUS-REPEATER-NET 24160 011 AUS-REPEATER-NET Melbourne, Victoria Australia AUS-REPEATER-NET
MNWIS-FUSION 21493 025 MNWis Fusion Network Lino Lakes,MN USA MN and WI Fusion. Tech Net Mon 7:30Central
LA-REPEATER 21042 010 LA REPEATER Mt. Wilson,CA USA www.socalham.com
 
Note that when local repeater 444.500+ VE7KEL is disconnected from any room, it will automatically reconnect by default to the Canada Room (CQ-CANADA-VE1AO) within about 15 seconds.
 
 
'''FT70DR Other Basic  Functions (rotating the top knob changes most options once selected)'''
 
Set Power - Hi/Mid/Low - Press F, press 1
Start Scan - Press F, press 2  
Start Scan - Press F, press 2  
Stop Scan - Press BAND
Stop Scan - Press BAND
Set Offset - +/-/simplex - Press F, press 0
Set Offset - +/-/simplex - Press F, press 0
VFO/Memory toggle - V/M
VFO/Memory toggle - V/M
Check input frequency - Press HM/RV (Menu 26 must be set to REV)<brclass="mw_emptyline_first" />Toggle Mode - VW/DN/FM - Press MODE (Menu 16 DIG VW must be set to ON to allow for VW)
Check input frequency - Press HM/RV (Menu 26 must be set to REV)
 
Toggle Mode - VW/DN/FM - Press MODE (Menu 16 DIG VW must be set to ON to allow for VW)
Toggle AMS - hold AMS button
Toggle AMS - hold AMS button
Set Freq Step - Press F, press 4 (5/10/15 etc or set to AUTO)
Set Freq Step - Press F, press 4 (5/10/15 etc or set to AUTO)
Line 32: Line 104:
Direct Memory Selection in MEM - press number keys for memory channel
Direct Memory Selection in MEM - press number keys for memory channel
Write VFO to Memory - Hold V/M, select channel with knob, Hold V/M, (enter optional label), Hold V/M.
Write VFO to Memory - Hold V/M, select channel with knob, Hold V/M, (enter optional label), Hold V/M.
Delete Memory - Hold V/M, select memory to delete, press AMS, press AMS.<brclass="mw_emptyline_first" />Access Menu Options - Hold F<brclass="mw_emptyline_first" />small blinking box at bottom of display - position indicates squelch setting from 1 to 9.
Delete Memory - Hold V/M, select memory to delete, press AMS, press AMS.
 
Access Menu Options - Hold F
 
small blinking box at bottom of display - position indicates squelch setting from 1 to 9.
small "T" at top - CTCSS tone encode – is set to transmit a specific tone for repeaters which require one
small "T" at top - CTCSS tone encode – is set to transmit a specific tone for repeaters which require one
small "T SQ" at top - CTCSS tone decode - is set to open the squelch only when the orrect tone is received (VE7VZ FT70DR-WIRES-X-NotesV2.odt)
small "T SQ" at top - CTCSS tone decode - is set to open the squelch only when the orrect tone is received (VE7VZ FT70DR-WIRES-X-NotesV2.odt)

Revision as of 05:42, 4 July 2019

UNDER CONSTRUCTION) (Editing still required for formatting)



FT70DR Operation on WIRES-X Nodes (System Fusion Rooms) (Draft V2 by VE7VZ, Suggestions welcome)

Check your DG-ID (most repeaters usually 00) in menu 63. Setting this menu to AUTO usually works. Once set this does not normally need to be changed.

A WIRES-X NODE listens to the local repeater, and you can use it as a gateway to access the System Fusion Rooms (System Fusion digital modulation is also called C4FM). A ROOM is another name for a reflector, to which a collection of nodes is connected. Multiple nodes and repeaters might be connected together in a single room, and the activity on any node in the room will be heard on all other nodes.

If the node on the local repeater is already connected to a room, no special actions are required. Just talk as normal and you will be heard throughout the room and all connected nodes. If you want to monitor a different room, see below.


NODE COMMANDS - CONNECTING TO A NODE

Press F,then immediately press AMS.


NODE COMMANDS - REVIEWING INFORMATION ONCE CONNECTED TO A NODE

If connected to the node the first part of the room name should be displayed, then it will scroll if more than 6 characters. If no connection is made, the display will flash "WIRES" for 30 seconds, then time out and return to normal operation.

Rotating the top knob will show several screens of info. Cn - displays room ID (e.g. CQ-CANADA-VE1AO) C0 - stores the most recently accessed room C1,C2,C3,C4,C5 – each memory stores a prefered room number to access En - Allows direct entry to a room (e.g. *40678) where 40678 is the room number. Enter the desired number. Lc - local callsign of the node you are accessing (e.g. VE7KEL-RPT)


NODE COMMANDS - CHANGING A ROOM

Select one of C0 thru C5, or En, and press AMS to connect. This automatically disconnects any previous room.


Storing a room in memory (C1-C5)

While on the Cn screen and connected to a room, press and hold any key 1 thru 5 to store the room in the corresponding memory


Erase a room in memory (C1-C5)

While on one of the memory screens (C1-C5) press and hold HM/RV to erase the memory


NODE COMMANDS - DISCONNECT THE NODE FROM A ROOM

Press and hold the BAND key. (Optional. As a courtesy, set it back on the room it was previously connected to when you are finished.)


NODE COMMANDS - DISCONNECT YOUR RADIO FROM A NODE

Press and hold MODE key. This exits any node information on screen, and returns the radio to normal use. (***Note that you must be disconnected from the node before you can talk through the node for regular conversation.***)


LATEST WIRES-X ACTIVE ROOM ID LIST

https://www.yaesu.com/jp/en/wires-x/id/active_room.php

A Sampling of Common Rooms Connected Room ID DTMF# Nodes Room Name Hosted in Country


----- ------ ---- -------- -------CQ-CANADA-VE1AO 40678 022 CQ-CANADA-VE1AO Truro, Nova Scotia Canada www.cqcanada.com Net Wed 6PM Pacific


CANADA-LINK 40505 005 OTTAWA VE3ORF GROUP Ottawa, Ontario Canada Linked System of Repeaters and Nightly HF Net


CQ-UK 27793 032 CQ-UK Pudsey, West Yorkshire UK XLX925A ALL MODES


AMERICA-LINK 21080 111 America Link Network Beaumont, Texas USA America Link Network-Central

CQ-AMERICA 21000 006 CQ AMERICA Shinagawa-ku,Tokyo Japan CQ Room for America by YAESU MUSEN. CQ-KAMLOOPS-BC 45028 001 CQ-KAMLOOPS-BC Kamloops, BC Canada Kamloops Hang Out CQ-VICTORIA-BC 21422 002 CQ-VICTORIA-BC Sooke, BC Canada CRD Emergency Program - Wires-X HRI200 BC-NORTH-C4FM 43363 001 BC-NORTH-C4FM Terrace, BC Canada All stations welcome. AUS-REPEATER-NET 24160 011 AUS-REPEATER-NET Melbourne, Victoria Australia AUS-REPEATER-NET MNWIS-FUSION 21493 025 MNWis Fusion Network Lino Lakes,MN USA MN and WI Fusion. Tech Net Mon 7:30Central LA-REPEATER 21042 010 LA REPEATER Mt. Wilson,CA USA www.socalham.com

Note that when local repeater 444.500+ VE7KEL is disconnected from any room, it will automatically reconnect by default to the Canada Room (CQ-CANADA-VE1AO) within about 15 seconds.


FT70DR Other Basic Functions (rotating the top knob changes most options once selected)

Set Power - Hi/Mid/Low - Press F, press 1 Start Scan - Press F, press 2 Stop Scan - Press BAND Set Offset - +/-/simplex - Press F, press 0 VFO/Memory toggle - V/M Check input frequency - Press HM/RV (Menu 26 must be set to REV)

Toggle Mode - VW/DN/FM - Press MODE (Menu 16 DIG VW must be set to ON to allow for VW) Toggle AMS - hold AMS button Set Freq Step - Press F, press 4 (5/10/15 etc or set to AUTO) Set Tone Squelch Type - Press F, press 5 (usually select NONE/TONE/TSQL) Select Tone Frequency - Press F, press 6 (won't work unless TONE/TSQL set above) Skip Memory - select memory, press F, press 9 (small triangle in top left indicates skip) Set Squelch Level - (Menu 44 RF SQL S1-S9) OR Press F, press MONI (button on left side)(1-15) Direct Frequency Entry in VFO - press number keys for frequency Direct Memory Selection in MEM - press number keys for memory channel Write VFO to Memory - Hold V/M, select channel with knob, Hold V/M, (enter optional label), Hold V/M. Delete Memory - Hold V/M, select memory to delete, press AMS, press AMS.

Access Menu Options - Hold F

small blinking box at bottom of display - position indicates squelch setting from 1 to 9. small "T" at top - CTCSS tone encode – is set to transmit a specific tone for repeaters which require one small "T SQ" at top - CTCSS tone decode - is set to open the squelch only when the orrect tone is received (VE7VZ FT70DR-WIRES-X-NotesV2.odt)