VA7STV/QTH HamWAN Configuration

From OCARC
Revision as of 23:38, 19 October 2017 by Va7stv (talk | contribs)
Jump to navigation Jump to search
  1. oct/19/2017 16:37:59 by RouterOS 6.40
  2. software id = LEN1-Q3C5
  3. model = RouterBOARD LHG 5nD
  4. serial number = 74D806D6673C

/interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyn basic-rates-a/g=\

   6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps channel-width=10mhz disabled=no frequency=5920 \
   frequency-mode=superchannel ht-basic-mcs="mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10\
   ,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15,mcs-16,mcs-17,mcs-18,mcs-19,mcs-20,mcs-21,mcs-22,mcs-23" radio-name=\
   VA7STV scan-list=HamWAN ssid=HamWan wireless-protocol=nv2

/interface vlan add interface=ether1 name=vlan1 vlan-id=1 /interface wireless channels add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\

   Sector1-5 width=5

add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \

   name=Sector2-5 width=5

add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \

   name=Sector3-5 width=5

add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\

   Sector1-10 width=10

add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \

   name=Sector2-10 width=10

add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \

   name=Sector3-10 width=10

add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\

   Sector1-5 width=5

add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \

   name=Sector2-5 width=5

add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \

   name=Sector3-5 width=5

add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=\

   Sector1-10 width=10

add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN \

   name=Sector2-10 width=10

add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN \

   name=Sector3-10 width=10

add band=5ghz-onlyn frequency=5890 list=LinkChannels name=LINK-5890-10 width=10 add band=5ghz-onlyn frequency=5910 list=LinkChannels name=LINK-5910-10 width=10 add band=5ghz-onlyn frequency=5890 list=LinkChannels name=LINK-5890-5 width=5 add band=5ghz-onlyn frequency=5910 list=LinkChannels name=LINK-5910-5 width=5 add band=5ghz-onlyn frequency=6050 list=LinkChannels name=LINK-6050 width=10 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip hotspot profile set [ find default=yes ] html-directory=flash/hotspot /ip pool add name=dhcp ranges=192.168.88.10-192.168.88.254 /queue simple add burst-threshold=2M/5M disabled=yes dst=ether1 limit-at=256k/256k max-limit=256k/256k name=queue1 \

   packet-marks=no-mark target=""

add max-limit=5M/25M name="Full Speed" target="" /snmp community set [ find default=yes ] name=hamwan /interface wireless align set receive-all=yes ssid-all=yes /interface wireless connect-list add disabled=yes interface=wlan1 mac-address=6C:3B:6B:16:70:DA security-profile=default add disabled=yes interface=wlan1 mac-address=4C:5E:0C:1F:51:A0 security-profile=default /ip dhcp-client add default-route-distance=10 dhcp-options=hostname,clientid disabled=no interface=ether1 add default-route-distance=5 disabled=no interface=wlan1 /ip dhcp-server network add address=192.168.88.0/24 comment=defconf dns-server=8.8.8.8 gateway=192.168.88.1 /ip dns set servers=8.8.8.8 /ip dns static add address=192.168.88.1 name=router /ip firewall filter add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp add action=accept chain=input comment="defconf: accept established,related" connection-state=\

   established,related

add action=drop chain=input comment="defconf: drop all from WAN" disabled=yes in-interface=wlan1 add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related \

   disabled=yes

add action=accept chain=forward comment="defconf: accept established,related" connection-state=\

   established,related

add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \

   connection-state=new in-interface=wlan1

add action=accept chain=input in-interface=wlan1 src-address=24.71.118.152 add action=accept chain=input in-interface=wlan1 src-address=44.135.216.0/23 add action=drop chain=input in-interface=wlan1 /ip firewall nat add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=wlan1 /ip service set ftp address=44.0.0.0/8 /snmp set enabled=yes location="49.895100, -119.392502" trap-version=2 /system clock set time-zone-name=America/Vancouver /system identity set name=VA7STV/QTH2 /system leds set 0 interface=wlan1 /tool bandwidth-server set authenticate=no /tool graphing interface add /tool graphing resource add /tool mac-server add interface=ether1 /tool mac-server mac-winbox add interface=ether1