RADIO0.LMK - Revision history

Va7stv at 04:36, 27 June 2017

2017-06-27T04:36:32Z

← Older revision		Revision as of 04:36, 27 June 2017
Line 1:		Line 1:
			{{Template:HamWAN Site Bar\| backlink=[[Installation/LMK HamWAN Sector\|LMK HamWAN Sector]]}}

	[[RADIO0.LMK/Configuration\|Configuration]]		[[RADIO0.LMK/Configuration\|Configuration]]

Va7stv at 16:53, 23 June 2017

2017-06-23T16:53:28Z

← Older revision		Revision as of 16:53, 23 June 2017
Line 1:		Line 1:
	[[RADIO0.LMK/Configuration\|Configuration]]		[[RADIO0.LMK/Configuration\|Configuration]]


			=Status=
			{\| class="wikitable"
			\|-
			! Health !! Activity
			\|-
			\|<img src="http://wiki.ocarc.ca/graph_image.php?local_graph_id=160&graph_width=500&graph_height=120">\|\| <img src="http://wiki.ocarc.ca/graph_image.php?local_graph_id=163&graph_width=500&graph_height=120">
			\|}

Va7stv: Replaced content with "Configuration"

2017-06-23T16:52:06Z

Replaced content with "Configuration"

← Older revision		Revision as of 16:52, 23 June 2017
Line 1:		Line 1:
	~~'''Working Configuration Pulled 6/16/2017 by VA7STV'''~~		[[RADIO0.LMK/Configuration\|Configuration]]

	~~<pre>~~
	~~# jan/06/1970 15:55:16 by RouterOS 6.35.1~~
	~~# software id = 3AI0-3ZMS~~
	#
	~~/interface bridge~~
	~~add name=BRIDGE-HAMWAN-PRIVATE~~
	~~add name=BRIDGE-HAMWAN-PUBLIC~~
	~~/interface wireless~~
	~~set~~ [ ~~find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=no frequency=5920 frequency-mode=superchannel mode=ap-bridge nv2-cell-radius=100 radio-name=\~~
	~~VA7DIG/LMK-~~RADIO0 ~~rx-chains=0,1 ssid=HamWan tdma-period-size=4 tx-chains=0,1 wireless-protocol=nv2~~
	~~/interface vlan~~
	~~add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601~~
	~~add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600~~
	~~/interface wireless channels~~
	~~add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5~~
	~~add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-5 width=5~~
	~~add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-5 width=5~~
	~~add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-10 width=10~~
	~~add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10~~
	~~add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10~~
	~~add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5~~
	~~/interface wireless security-profiles~~
	~~set [ find default=yes ] supplicant-identity=MikroTik~~
	~~/interface bridge port~~
	~~add comment=defconf interface=ether1~~
	~~add bridge=BRIDGE-HAMWAN-PUBLIC comment=defconf interface=wlan1~~
	~~add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC~~
	~~add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE~~
	~~/ip address~~
	~~add address=10~~.~~246.1.2/16 interface=BRIDGE-HAMWAN-PRIVATE network=10.246.0.0~~
	~~/system identity~~
	~~set name=~~LMK~~-RADIO0~~
	/~~system leds~~
	~~set 0 interface=wlan1~~
	~~/system routerboard settings~~
	~~set cpu-frequency=600MHz init-delay=0s protected-routerboot=disabled~~

	~~</pre>~~

Va7stv: Va7stv moved page Radio0.lmk to RADIO0.LMK

2017-06-23T16:45:01Z

Va7stv moved page Radio0.lmk to RADIO0.LMK

← Older revision	Revision as of 16:45, 23 June 2017
(No difference)

Va7stv at 17:16, 16 June 2017

2017-06-16T17:16:27Z

← Older revision		Revision as of 17:16, 16 June 2017
Line 1:		Line 1:
			'''Working Configuration Pulled 6/16/2017 by VA7STV'''

	<pre>		<pre>
	~~[admin@LMK-RADIO0] > export~~		# jan/06/1970 15:55:16 by RouterOS 6.35.1
	# jan/02/1970 00:30:22 by RouterOS 6.35.1
	# software id = 3AI0-3ZMS		# software id = 3AI0-3ZMS
	#		#
Line 8:		Line 9:
	add name=BRIDGE-HAMWAN-PUBLIC		add name=BRIDGE-HAMWAN-PUBLIC
	/interface wireless		/interface wireless
	set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=\		set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=no frequency=5920 frequency-mode=superchannel mode=ap-bridge nv2-cell-radius=100 radio-name=\
	no frequency=5920 frequency-mode=superchannel mode=ap-bridge \		VA7DIG/LMK-RADIO0 rx-chains=0,1 ssid=HamWan tdma-period-size=4 tx-chains=0,1 wireless-protocol=nv2
	nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 rx-chains=0,1 ssid=\
	HamWan tdma-period-size=4 tx-chains=0,1 wireless-protocol=nv2
	/interface vlan		/interface vlan
	add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601		add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601
	add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600		add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600
	/interface wireless channels		/interface wireless channels
	add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \		add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5
	frequency=5920 list=HamWAN name=Sector1-5 width=5		add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-5 width=5
	add band=5ghz-onlyn comment=\		add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-5 width=5
	"Cell sites radiate this at 120 degrees (south-east)" frequency=5900 \		add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-10 width=10
	list=HamWAN name=Sector2-5 width=5		add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10
	add band=5ghz-onlyn comment=\		add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10
	"Cell sites radiate this at 240 degrees (south-west)" frequency=5880 \		add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5
	list=HamWAN name=Sector3-5 width=5
	add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
	frequency=5920 list=HamWAN name=Sector1-10 width=10
	add band=5ghz-onlyn comment=\
	"Cell sites radiate this at 120 degrees (south-east)" frequency=5900 \
	list=HamWAN name=Sector2-10 width=10
	add band=5ghz-onlyn comment=\
	"Cell sites radiate this at 240 degrees (south-west)" frequency=5880 \
	list=HamWAN name=Sector3-10 width=10
	add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
	frequency=5920 list=HamWAN name=Sector1-5 width=5
	/interface wireless security-profiles		/interface wireless security-profiles
	set [ find default=yes ] supplicant-identity=MikroTik		set [ find default=yes ] supplicant-identity=MikroTik
Line 39:		Line 27:
	add comment=defconf interface=ether1		add comment=defconf interface=ether1
	add bridge=BRIDGE-HAMWAN-PUBLIC comment=defconf interface=wlan1		add bridge=BRIDGE-HAMWAN-PUBLIC comment=defconf interface=wlan1
	~~add~~
	~~add~~
	~~add~~
	add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC		add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC
	add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE		add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE
Line 52:		Line 37:
	/system routerboard settings		/system routerboard settings
	set cpu-frequency=600MHz init-delay=0s protected-routerboot=disabled		set cpu-frequency=600MHz init-delay=0s protected-routerboot=disabled

	</pre>		</pre>

Va7zat at 00:06, 12 June 2017

2017-06-12T00:06:12Z

← Older revision		Revision as of 00:06, 12 June 2017
Line 1:		Line 1:
	<pre>		<pre>
	# jan/02/1970 00:10:30 by RouterOS 6.35.1		[admin@LMK-RADIO0] > export
			# jan/02/1970 00:30:22 by RouterOS 6.35.1
	# software id = 3AI0-3ZMS		# software id = 3AI0-3ZMS
	#		#
Line 6:		Line 7:
	add name=BRIDGE-HAMWAN-PRIVATE		add name=BRIDGE-HAMWAN-PRIVATE
	add name=BRIDGE-HAMWAN-PUBLIC		add name=BRIDGE-HAMWAN-PUBLIC
	~~add admin-mac=4C:5E:0C:1F:50:2B auto-mac=no comment=defconf name=bridge~~
	/interface wireless		/interface wireless
	set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=no frequency=5920 frequency-mode=superchannel mode=ap-bridge nv2-cell-radius=100 radio-name=\		set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=\
	VA7DIG/LMK-RADIO0 rx-chains=0,1 ssid=HamWan tdma-period-size=4 tx-chains=0,1 wireless-protocol=nv2		no frequency=5920 frequency-mode=superchannel mode=ap-bridge \
	~~/ip neighbor discovery~~		nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 rx-chains=0,1 ssid=\
	~~set bridge comment=defconf~~		HamWan tdma-period-size=4 tx-chains=0,1 wireless-protocol=nv2
	/interface vlan		/interface vlan
	add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601		add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601
	add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600		add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600
	~~add interface=wlan1 name=WLAN1-HAMWAN-PUBLIC vlan-id=600~~
	/interface wireless channels		/interface wireless channels
	add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5		add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
	add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-5 width=5		frequency=5920 list=HamWAN name=Sector1-5 width=5
	add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-5 width=5		add band=5ghz-onlyn comment=\
	add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-10 width=10		"Cell sites radiate this at 120 degrees (south-east)" frequency=5900 \
	add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10		list=HamWAN name=Sector2-5 width=5
	add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10		add band=5ghz-onlyn comment=\
	add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5		"Cell sites radiate this at 240 degrees (south-west)" frequency=5880 \
			list=HamWAN name=Sector3-5 width=5
			add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
			frequency=5920 list=HamWAN name=Sector1-10 width=10
			add band=5ghz-onlyn comment=\
			"Cell sites radiate this at 120 degrees (south-east)" frequency=5900 \
			list=HamWAN name=Sector2-10 width=10
			add band=5ghz-onlyn comment=\
			"Cell sites radiate this at 240 degrees (south-west)" frequency=5880 \
			list=HamWAN name=Sector3-10 width=10
			add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
			frequency=5920 list=HamWAN name=Sector1-5 width=5
	/interface wireless security-profiles		/interface wireless security-profiles
	set [ find default=yes ] supplicant-identity=MikroTik		set [ find default=yes ] supplicant-identity=MikroTik
	/interface bridge port		/interface bridge port
	add ~~bridge=bridge~~ comment=defconf interface=ether1		add comment=defconf interface=ether1
	add bridge=~~bridge~~ comment=defconf interface=wlan1		add bridge=BRIDGE-HAMWAN-PUBLIC comment=defconf interface=wlan1
	add		add
	add		add
Line 34:		Line 44:
	add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC		add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC
	add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE		add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE
	~~add bridge=BRIDGE-HAMWAN-PUBLIC interface=WLAN1-HAMWAN-PUBLIC~~
	/ip address		/ip address
	add address=10.246.1.2/16 interface=BRIDGE-HAMWAN-PRIVATE network=10.246.0.0		add address=10.246.1.2/16 interface=BRIDGE-HAMWAN-PRIVATE network=10.246.0.0
Line 43:		Line 52:
	/system routerboard settings		/system routerboard settings
	set cpu-frequency=600MHz init-delay=0s protected-routerboot=disabled		set cpu-frequency=600MHz init-delay=0s protected-routerboot=disabled

	</pre>		</pre>

Va7stv at 23:34, 11 June 2017

2017-06-11T23:34:56Z

← Older revision		Revision as of 23:34, 11 June 2017
Line 1:		Line 1:
	<pre>		<pre>
			# jan/02/1970 00:10:30 by RouterOS 6.35.1
			# software id = 3AI0-3ZMS
			#
			/interface bridge
			add name=BRIDGE-HAMWAN-PRIVATE
			add name=BRIDGE-HAMWAN-PUBLIC
			add admin-mac=4C:5E:0C:1F:50:2B auto-mac=no comment=defconf name=bridge
			/interface wireless
			set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=no frequency=5920 frequency-mode=superchannel mode=ap-bridge nv2-cell-radius=100 radio-name=\
			VA7DIG/LMK-RADIO0 rx-chains=0,1 ssid=HamWan tdma-period-size=4 tx-chains=0,1 wireless-protocol=nv2
			/ip neighbor discovery
			set bridge comment=defconf
	/interface vlan		/interface vlan
			add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601
	add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600		add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600
	~~add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601~~

	~~/interface vlan~~
	add interface=wlan1 name=WLAN1-HAMWAN-PUBLIC vlan-id=600		add interface=wlan1 name=WLAN1-HAMWAN-PUBLIC vlan-id=600

	~~/interface bridge~~
	~~add name=BRIDGE-HAMWAN-PUBLIC~~
	~~add name=BRIDGE-HAMWAN-PRIVATE~~

	~~/interface bridge port~~
	~~add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC~~
	~~add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE~~
	~~add bridge=BRIDGE-HAMWAN-PUBLIC interface=WLAN1-HAMWAN-PUBLIC~~

	/interface wireless channels		/interface wireless channels
	add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5		add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5
Line 24:		Line 23:
	add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10		add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10
	add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10		add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10
			add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5
	~~/interface wireless~~		/interface wireless security-profiles
	~~set [ find default-name=wlan1 ]~~ band=5ghz-onlyn ~~channel-width~~=~~10mhz disabled=no \~~		set [ find default=yes ] supplicant-identity=MikroTik
	frequency=5920 ~~frequency-mode~~=~~superchannel ht-rxchains~~=~~0,1 ht~~-~~txchains~~=~~0,1 l2mtu=\~~		/interface bridge port
	~~2290 mode=ap~~-~~bridge nv2-cell-radius~~=~~100 radio~~-~~name~~=~~VA7DIG~~/~~LMK-RADIO0 ssid=HamWAN \~~		add bridge=bridge comment=defconf interface=ether1
	~~tdma-period-size~~=~~4 wireless-protocol~~=~~nv2 frequency-mode~~=~~superchannel~~		add bridge=bridge comment=defconf interface=wlan1
			add
	/interface ~~wireless set [ find default-name~~=wlan1 ~~] band~~=~~5ghz~~-~~onlyn channel~~-~~width~~=~~5mhz disabled=no frequency=5920 mode=ap~~-bridge ~~nv2~~-~~cell~~-~~radius~~=~~100 radio~~-~~name=VA7DIG/LMK~~-~~RADIO0 ssid~~=~~HamWan tdma~~-~~period~~-~~size~~=~~4 wireless~~-~~protocol=nv2~~		add
			add
			add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC
			add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE
			add bridge=BRIDGE-HAMWAN-PUBLIC interface=WLAN1-HAMWAN-PUBLIC
	/ip address		/ip address
	add address=10.246.1.2/16 interface=~~ether1~~ network=10.246.0.0		add address=10.246.1.2/16 interface=BRIDGE-HAMWAN-PRIVATE network=10.246.0.0

	/system identity		/system identity
	set name=LMK-RADIO0		set name=LMK-RADIO0
			/system leds
			set 0 interface=wlan1
			/system routerboard settings
			set cpu-frequency=600MHz init-delay=0s protected-routerboot=disabled

	</pre>		</pre>

Va7stv at 22:49, 11 June 2017

2017-06-11T22:49:13Z

← Older revision		Revision as of 22:49, 11 June 2017
Line 1:		Line 1:
	<pre>		<pre>

			/interface vlan
			add interface=ether1 name=ETH1-HAMWAN-PUBLIC vlan-id=600
			add interface=ether1 name=ETH1-HAMWAN-PRIVATE vlan-id=601

			/interface vlan
			add interface=wlan1 name=WLAN1-HAMWAN-PUBLIC vlan-id=600

			/interface bridge
			add name=BRIDGE-HAMWAN-PUBLIC
			add name=BRIDGE-HAMWAN-PRIVATE

			/interface bridge port
			add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH1-HAMWAN-PUBLIC
			add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH1-HAMWAN-PRIVATE
			add bridge=BRIDGE-HAMWAN-PUBLIC interface=WLAN1-HAMWAN-PUBLIC

	/interface wireless channels		/interface wireless channels

Va7stv at 22:16, 11 June 2017

2017-06-11T22:16:30Z

← Older revision		Revision as of 22:16, 11 June 2017
Line 10:		Line 10:

	/interface wireless		/interface wireless
	set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=~~5mhz~~ disabled=no \		set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=no \
	frequency=5920 frequency-mode=superchannel ht-rxchains=0,1 ht-txchains=0,1 l2mtu=\		frequency=5920 frequency-mode=superchannel ht-rxchains=0,1 ht-txchains=0,1 l2mtu=\
	2290 mode=ap-bridge nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 ssid=HamWAN \		2290 mode=ap-bridge nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 ssid=HamWAN \
	tdma-period-size=4 wireless-protocol=nv2		tdma-period-size=4 wireless-protocol=nv2 frequency-mode=superchannel

			/interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=5mhz disabled=no frequency=5920 mode=ap-bridge nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 ssid=HamWan tdma-period-size=4 wireless-protocol=nv2


	/ip address		/ip address

Va7stv: Created page with "

  /interface wireless channels add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5 add band=5ghz-..."

2017-06-11T22:02:49Z

Created page with "<pre> /interface wireless channels add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5 add band=5ghz-..."

New page

<pre>

/interface wireless channels
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10

/interface wireless
set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=5mhz disabled=no \
frequency=5920 frequency-mode=superchannel ht-rxchains=0,1 ht-txchains=0,1 l2mtu=\
2290 mode=ap-bridge nv2-cell-radius=100 radio-name=VA7DIG/LMK-RADIO0 ssid=HamWAN \
tdma-period-size=4 wireless-protocol=nv2

/ip address
add address=10.246.1.2/16 interface=ether1 network=10.246.0.0

/system identity
set name=LMK-RADIO0
</pre>