HEX1.BKM - Revision history

Va7stv at 04:01, 1 October 2017

2017-10-01T04:01:27Z

← Older revision		Revision as of 04:01, 1 October 2017
Line 67:		Line 67:
	add bridge=BRIDGE-HAMWAN-PUBLIC interface=ether1		add bridge=BRIDGE-HAMWAN-PUBLIC interface=ether1
	/ip address		/ip address
	add address=10.246.3.1/16 comment=defconf interface=BRIDGE-HAMWAN-PRIVATE network=10.246.0.0		add address=10.246.2.1/16 comment=defconf interface=BRIDGE-HAMWAN-PRIVATE network=10.246.0.0
	~~/ip dns static~~
	~~add address=192.168.88.1 name=router~~
	/ip firewall filter		/ip firewall filter
	add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp		add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
	add action=accept chain=input comment="defconf: accept established,related" connection-state=\		add action=accept chain=input comment="defconf: accept established,related" connection-state=\
	established,related		established,related
	# in/out-interface matcher not possible when interface (ether1) is slave - use master instead (BRIDGE-H MWAN-PUBLIC)
	add action=drop chain=input comment="defconf: drop all from WAN" in-interface=ether1		add action=drop chain=input comment="defconf: drop all from WAN" in-interface=ether1
	add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=\		add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=\
Line 81:		Line 78:
	established,related		established,related
	add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid		add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
	# in/out-interface matcher not possible when interface (ether1) is slave - use master instead (BRIDGE-H MWAN-PUBLIC)
	add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" \		add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" \
	connection-nat-state=!dstnat connection-state=new in-interface=ether1		connection-nat-state=!dstnat connection-state=new in-interface=ether1
	/ip firewall nat		/ip firewall nat
	# in/out-interface matcher not possible when interface (ether1) is slave - use master instead (BRIDGE-H MWAN-PUBLIC)
	add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=ether1		add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=ether1
	/snmp		/snmp
	set contact="#HamWAN on irc.freenode.org" enabled=yes		set contact="#HamWAN on irc.freenode.org" enabled=yes
	/system identity		/system identity
	set name=HEX1.~~KUI~~		set name=HEX1.BKM
	/system routerboard settings		/system routerboard settings
	set cpu-frequency=800MHz protected-routerboot=disabled		set cpu-frequency=800MHz protected-routerboot=disabled
	/tool mac-server		/tool mac-server
	set [ find default=yes ] disabled=yes		set [ find default=yes ] disabled=yes

Va7stv at 04:00, 1 October 2017

2017-10-01T04:00:28Z

← Older revision		Revision as of 04:00, 1 October 2017
Line 27:		Line 27:
	! colspan="4" \|		! colspan="4" \|
	\|}		\|}


			==Configuration==
			<pre>
			# mar/02/1970 09:34:36 by RouterOS 6.36.3
			# software id = N044-E777
			#
			/interface bridge
			add name=BRIDGE-HAMWAN-PRIVATE
			add name=BRIDGE-HAMWAN-PUBLIC
			/ip neighbor discovery
			set ether1 discover=no
			/interface vlan
			add interface=ether2 name=ETH2-HAMWAN-PRIVATE vlan-id=601
			add interface=ether2 name=ETH2-HAMWAN-PUBLIC vlan-id=600
			add interface=ether3 name=ETH3-HAMWAN-PRIVATE vlan-id=601
			add interface=ether3 name=ETH3-HAMWAN-PUBLIC vlan-id=600
			add interface=ether4 name=ETH4-HAMWAN-PRIVATE vlan-id=601
			add interface=ether4 name=ETH4-HAMWAN-PUBLIC vlan-id=600
			add interface=ether5 name=ETH5-HAMWAN-PRIVATE vlan-id=601
			add interface=ether5 name=ETH5-HAMWAN-PUBLIC vlan-id=600
			add interface=sfp1 name=SFP1-HAMWAN-PRIVATE vlan-id=601
			add interface=sfp1 name=SFP1-HAMWAN-PUBLIC vlan-id=600
			/ip hotspot profile
			set [ find default=yes ] html-directory=flash/hotspot
			/snmp community
			set [ find default=yes ] name=hamwan
			/interface bridge port
			add bridge=BRIDGE-HAMWAN-PUBLIC interface=SFP1-HAMWAN-PUBLIC
			add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH2-HAMWAN-PUBLIC
			add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH3-HAMWAN-PUBLIC
			add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH4-HAMWAN-PUBLIC
			add bridge=BRIDGE-HAMWAN-PUBLIC interface=ETH5-HAMWAN-PUBLIC
			add bridge=BRIDGE-HAMWAN-PRIVATE interface=SFP1-HAMWAN-PRIVATE
			add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH2-HAMWAN-PRIVATE
			add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH3-HAMWAN-PRIVATE
			add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH4-HAMWAN-PRIVATE
			add bridge=BRIDGE-HAMWAN-PRIVATE interface=ETH5-HAMWAN-PRIVATE
			add bridge=BRIDGE-HAMWAN-PUBLIC interface=ether1
			/ip address
			add address=10.246.3.1/16 comment=defconf interface=BRIDGE-HAMWAN-PRIVATE network=10.246.0.0
			/ip dns static
			add address=192.168.88.1 name=router
			/ip firewall filter
			add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
			add action=accept chain=input comment="defconf: accept established,related" connection-state=\
			established,related
			# in/out-interface matcher not possible when interface (ether1) is slave - use master instead (BRIDGE-H MWAN-PUBLIC)
			add action=drop chain=input comment="defconf: drop all from WAN" in-interface=ether1
			add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=\
			established,related
			add action=accept chain=forward comment="defconf: accept established,related" connection-state=\
			established,related
			add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
			# in/out-interface matcher not possible when interface (ether1) is slave - use master instead (BRIDGE-H MWAN-PUBLIC)
			add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" \
			connection-nat-state=!dstnat connection-state=new in-interface=ether1
			/ip firewall nat
			# in/out-interface matcher not possible when interface (ether1) is slave - use master instead (BRIDGE-H MWAN-PUBLIC)
			add action=masquerade chain=srcnat comment="defconf: masquerade" out-interface=ether1
			/snmp
			set contact="#HamWAN on irc.freenode.org" enabled=yes
			/system identity
			set name=HEX1.KUI
			/system routerboard settings
			set cpu-frequency=800MHz protected-routerboot=disabled
			/tool mac-server
			set [ find default=yes ] disabled=yes

Va7stv: Created page with "{{Template:HamWAN Site Bar| backlink=BKM HamWAN Sector}} == Ports == {| class="wikitable" border="1" |- ! ! style="background: rgb(62,74,6..."

2017-07-03T22:18:54Z

Created page with "{{Template:HamWAN Site Bar| backlink=BKM HamWAN Sector}} == Ports == {| class="wikitable" border="1" |- ! ! style="background: rgb(62,74,6..."

New page

{{Template:HamWAN Site Bar| backlink=[[Installation/BKM HamWAN Sector|BKM HamWAN Sector]]}}

== Ports ==
{| class="wikitable" border="1"
|-
!
! style="background: rgb(62,74,60); color: white"|DC IN
! style="background: rgb(101,192,195)"|SFP 
! style="background: rgb(101,192,195)"|eth1 PoE IN
! style="background: rgb(250,208,12)"|eth2 PoE OUT
! style="background: rgb(250,208,12)"|eth3 PoE OUT
! style="background: rgb(250,208,12)"|eth4 PoE OUT
! style="background: rgb(250,208,12)"|eth5 PoE OUT
|-
! colspan="2" |
| not used
| not used
| not used
| not used
| not used
| not used
|-
! Power
| no
!
| 12v battery
! colspan="4" |
|}